BS 5163 Flanged Resilient OS&Y Gate Valve, Type B (Z41XB), PN10/16

Application Scope

Industrial Valves produced by Mike Valve is applied to the following industries.Mike Valve always gives priority to customers and services. With a great focus on customers, we strive to meet their needs and provide optimal solutions.

Company Advantages
1. flanged gate valve are likely to possess features likecast iron gate valve .
2. This product can last for a long time. Its surface is coated with protective substances to prevent exterior chemical corrosion.
3. It is widely used in the applications of electronic products, electrical engineering materials, aerospace material, and mechanical engineering.
4. 刘秋红

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material:Ductile Iron EN-GJS-450-10

Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Z41X

• Connection Ends: Flange to BS EN 1092-2:1997

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Resilient Wedge Disc	EN-GJS-450-10+EPDM
3	Stem	SS420	SS304,SS316,Al-bronze
4	Bonnet Gasket	EPDM	NBR
5	Bonnet	EN-GJS-450-10
6	Washer	Brass HPb59-1
7	Yoke	EN-GJS-450-10
8	Stem nut	Brass HPb59-1
9	Gland ﬂange	EN-GJS-450-10
10	Wedge nut	Brass HPb59-1
11	Handwheel	EN-GJS-450-10	Pressed Steel
12	Washer	Brass HPb59-1
13	Nut	Carbon Steel Zinc Plated	SS304,SS16
14	Stud	Carbon Steel Zinc Plated	SS304,SS16
15	Flat Washer	Carbon Steel Zinc Plated	SS304,SS16
16	Nut	Carbon Steel Zinc Plated	SS304,SS16
17	O-Ring	NBR	EPDM

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

BS 5163 Flanged Resilient OS&Y Gate Valve, Type B (Z41XB), PN10/16-2

DN		Dimensions(mm)
Inch	mm	PN	L	H1(Close)	H2(Open)	D	D1	d	C	T	n-φL
2"	50	10/16	178	318	370	165	125	99	19	3	4-Φ19
2.5"	65	10/16	190	343	410	185	145	118	19	3	4-Φ19
3"	80	10/16	203	386	468	200	160	132	19	3	8-Φ19
4"	100	10/16	229	436	538	220	180	156	19	3	8-Φ19
5"	125	10/16	254	516	640	250	210	184	19	3	8-Φ19
6"	150	10/16	267	563	713	285	240	211	19	3	8-Φ23
8"	200	10	292	749	950	340	295	266	20	3	8-Φ23
		16									12-Φ23
10"	250	10	330	904	1158	405	350	319	22	3	12-Φ23
		16					355				12-Φ28
12"	300	10	356	1030	1335	460	400	370	24.5	4	12-Φ23
		16					410				12-Φ28
14"	350	10	381	1210	1560	520	460	429	26.5	4	16-Φ23
		16					470				16-Φ28
16"	400	10	406	1280	1680	580	515	480	28	4	16-Φ28
		16					525				16-Φ31
18"	450	10	432	1760	2210	640	565	530	30	4	20-Φ28
		16					585	548			20-Φ31
20"	500	10	457	1780	2280	715	620	582	31.5	4	20-Φ28
		16					650	609			20-Φ34
24"	600	10	508	1950	2550	840	725	682	36	5	20-Φ31
		16					770	720			20-Φ37

Company Features
1. Based on high quality, Shenzhen Mech Valve Trading Co., Ltd. is a highly reliable producer for flanged gate valve .
2. In the past years, Shenzhen Mech Valve Trading Co., Ltd. has cultivated its own product R&D capabilities.
3. There is no doubt that Shenzhen Mech Valve Trading Co., Ltd. will do everything possible to better serve our customers. Ask online! In Shenzhen Mech Valve Trading Co., Ltd., providing good service is always the key to seeking good development for company. Ask online! The vision of Mech Valve is resilient wedge gate valve which support our company to be the prominent manufacturer in the future. Ask online! Relying on the strong power, Mech Valve now can stand on the water gate valve market. Ask online!

e******d

Reliable raw materials: the raw materials of Mech are all sourced from the suppliers who have established long term reliable cooperation with us. Their products are all certified. It is suitable to apply in the parking lot, garage, high-bay workshop, stadiums, etc

k******w

Mech is fabricated meeting the production process standards. This product has good color consistency and accurate color rendering

r******s

Mech is manufactured according to the international advanced production practice - lean production and by use of internationally-sourced high-quality materials. The unique design of low current reduces the line loss

c******p

Strictly selected raw materials: Mech is made from top grade raw materials which are all well-selected and then are quickly put into precision production. Adopting an intelligent constant current driver, it has no flicker problem

l******z

Mech is finely and expertly manufactured in a combination of abundant expertise and advanced production technology. This product is made in line with the "green low carbon" proposed by the state

b******o

has a high performance and . It is suitable to apply in the parking lot, garage, high-bay workshop, stadiums, etc

Name

E-mail

Company Name

Content