BS 5163 Flanged Resilient OS&Y Gate Valve, Type B (Z41XB), PN10/16

Application Scope

Mike Valve's Industrial Valves can meet the different needs of customers.Mike Valve is committed to providing customers with high-quality Industrial Valves as well as one-stop, comprehensive and efficient solutions.

Enterprise Strength

Mike Valve runs a comprehensive product supply and after-sales service system. We are committed to providing thoughtful services for customers, so as to develop their greater sense of trust for the company.

Company Advantages
1. Shenzhen Mech Valve Trading Co., Ltd. takes quality of materiel seriously.
2. The product is 100% qualified as our quality control program has eliminated all defects.
3. The product increases the efficiency of the everyday sales environment thanks to different POS features such as barcode scanners or credit card terminals.
4. The product is widely used for healthcare, aged care, disability, commercial and residential industry to support the function of bathrooms.

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material:Ductile Iron EN-GJS-450-10

Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Z41X

• Connection Ends: Flange to BS EN 1092-2:1997

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Resilient Wedge Disc	EN-GJS-450-10+EPDM
3	Stem	SS420	SS304,SS316,Al-bronze
4	Bonnet Gasket	EPDM	NBR
5	Bonnet	EN-GJS-450-10
6	Washer	Brass HPb59-1
7	Yoke	EN-GJS-450-10
8	Stem nut	Brass HPb59-1
9	Gland ﬂange	EN-GJS-450-10
10	Wedge nut	Brass HPb59-1
11	Handwheel	EN-GJS-450-10	Pressed Steel
12	Washer	Brass HPb59-1
13	Nut	Carbon Steel Zinc Plated	SS304,SS16
14	Stud	Carbon Steel Zinc Plated	SS304,SS16
15	Flat Washer	Carbon Steel Zinc Plated	SS304,SS16
16	Nut	Carbon Steel Zinc Plated	SS304,SS16
17	O-Ring	NBR	EPDM

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

BS 5163 Flanged Resilient OS&Y Gate Valve, Type B (Z41XB), PN10/16-2

DN		Dimensions(mm)
Inch	mm	PN	L	H1(Close)	H2(Open)	D	D1	d	C	T	n-φL
2"	50	10/16	178	318	370	165	125	99	19	3	4-Φ19
2.5"	65	10/16	190	343	410	185	145	118	19	3	4-Φ19
3"	80	10/16	203	386	468	200	160	132	19	3	8-Φ19
4"	100	10/16	229	436	538	220	180	156	19	3	8-Φ19
5"	125	10/16	254	516	640	250	210	184	19	3	8-Φ19
6"	150	10/16	267	563	713	285	240	211	19	3	8-Φ23
8"	200	10	292	749	950	340	295	266	20	3	8-Φ23
		16									12-Φ23
10"	250	10	330	904	1158	405	350	319	22	3	12-Φ23
		16					355				12-Φ28
12"	300	10	356	1030	1335	460	400	370	24.5	4	12-Φ23
		16					410				12-Φ28
14"	350	10	381	1210	1560	520	460	429	26.5	4	16-Φ23
		16					470				16-Φ28
16"	400	10	406	1280	1680	580	515	480	28	4	16-Φ28
		16					525				16-Φ31
18"	450	10	432	1760	2210	640	565	530	30	4	20-Φ28
		16					585	548			20-Φ31
20"	500	10	457	1780	2280	715	620	582	31.5	4	20-Φ28
		16					650	609			20-Φ34
24"	600	10	508	1950	2550	840	725	682	36	5	20-Φ31
		16					770	720			20-Φ37

Company Features
1. Shenzhen Mech Valve Trading Co., Ltd. centers on the development and production of y gate valve in the meantime we offer a wide range of other product portfolios.
2. Shenzhen Mech Valve Trading Co., Ltd. has established its R&D center at abroad, and invited a number of foreign experts as technical advisers.
3. Shenzhen Mech Valve Trading Co., Ltd. will become a highly competitive company in the resilient wedge gate valve market. Please contact us! To enter into the high-end resilient seated gate valve market, Mech Valve has been following the international standard to produce flanged gate valve . Please contact us!

s******e

Every Mech is professionally designed by our experienced design team.

z******u

When designing Mech , the design team invests plenty of time in market research and designs a product that is more superior than others.

y******t

Premium raw materials: Mech is made of high quality raw materials. They are supplied by our reliable partners who have signed contracts and established cooperation relationship with us for over years.

e******b

Mech shows the outstanding performance, after years of improvement in the production process. The production process is managed in an efficient manner and therefore this product is produced at a quick rate.

u******z

Excellent craftsmanship: Mech is crafted with excellent craftsmanship which is a result of talents and skills. Its superior craftsmanship makes it high quality.

c******g

The product is very durable. Made of hard materials, it is less likely to be affected or destroyed by any surrounding element.

Name

E-mail

Company Name

Content