flow control valve | Gate Valve

Ductile Iron Gate Valve BS 5163 Flanged Resilient OS&Y Gate Valve, Type A (Z41X), PN10/16

Adjustable Pressure Relief Valve SK745X Pump Control

Pressure Relief Valve SK710X Electromagnetic Control

Strainer Valve Grooved Y-Type Strainer (V8), PN10/16

Product Information
Customer Reviews

Application Scope

The valve manufacturer produced by Mike Valve is of high quality and is widely used in the Manufacturing Valves Gate Valves industry.With many years of practical experience, Mike Valve is capable of providing comprehensive and efficient one-stop solutions.

Company Advantages
1. Mech Valve cast iron valve is design based on industry-leading design concept.
2. This product is tested by our quality controllers to assure its high performance at clients.
3. After years of development, Shenzhen Mech Valve Trading Co., Ltd. has accumulated a large number of consumer groups, domestic and foreign brand resources.
4. This product is now in line with market trends and will be popularized in the future.

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material

Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Z41X

• Connection Ends: Flange to ASME B16.1 CL 125

• Working Pressure: 300PSI 200PSI and 250PSI available upon request

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	ASTM A536,65-45-12
2	Resilient Wedge Disc	ASTM A536,65-45-12+EPDM
3	Stem	AISI 420	AISI 304, AISI 431, AISI 316, Al-bronze
4	Bonnet Gasket	EPDM	NBR
5	Bonnet	ASTM A536,65-45-12
6	Washer	Brass Hpb59-1
7	Yoke	ASTM A536,65-45-12
8	Stem Bushing	Brass Hpb59-1
9	Gland	ASTM A536,65-45-12
10	Stem Nut	Brass Hpb59-1	Bronze ZQSn5-5-5
11	Handwheel	ASTM A536,65-45-12	Pressed Steel
12	Washer	Brass Hpb59-1
13	Gland Nut	Carbon Steel Zinc Plated	AISI 304, AISI 316
14	Stud	Carbon Steel Zinc Plated	AISI 304, AISI 316
15	Flat Washer	Carbon Steel Zinc Plated	AISI 304, AISI 316
16	Nut	Carbon Steel Zinc Plated	AISI 304, AISI 316
17	O-Ring	EPDM	NBR

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

DN		Dimensions(mm)
Inch	mm	L	H1(Close)	H2(Open)	D	D1	C	n-ΦL
2"	50	178	318	370	152	120.7	16	4-Φ19.1
2.5"	65	190	343	410	178	139.7	17.5	4-Φ19.1
3"	80	203	386	468	191	152.4	19.1	4-Φ19.1
4"	100	229	436	538	229	190.5	19.1	8-Φ19.1
5"	125	254	516	640	254	215.9	19.1	8-Φ22.2
6"	150	267	576	730	279	241.3	19.1	8-Φ22.2
8"	200	292	749	950	343	298.5	22.2	8-Φ22.2
10"	250	330	904	1158	406	362	23.8	12-Φ25.4
12"	300	356	1030	1335	483	431.8	25.4	12-Φ25.4

Company Features
1. Shenzhen Mech Valve Trading Co., Ltd. has built a sterling reputation as one of the top producers and distributors specializing in flow control valve
2. Shenzhen Mech Valve Trading Co., Ltd. has achieved scientifical transform on wedge valve produce.
3. Shenzhen Mech Valve Trading Co., Ltd. will provide you with cost-effective products and services! Get info! Our strong belief is that we will definitely become a leading resilient seated gate valve manufacturer. Get info!

FAQ

1.How to get free samples ?

A: Send your address ,your telphone number ,post code ,and express account number to our mail box .and told us which model of samples you need .

2.Who pay for the express cost ?

A: We can support you free samples each model 1-3 pcs ,and we do not pay for express cost .

3.How long is the delivery time?

A:within 10-15 days after receiving deposit.

4.What is your payments?

A:T/T,30% deposite and 70% balance should be made before shippment.

5.What is your packing?

A: usually plastic bags,carton,can be packed as your require.

Our Services

DESIGNER TEAM FOR CUSTOMER

PACKING DESIGN

Inorder to help the importer smooth business,we have design team ,help to make customer packaging for order.

OEM FOR GOODS

We support OEM for customer ,we can make goods according to your size ,diameter,and material

CUSTOMER SERVICE TEAM

We have professional customer service team ,to help us smooth business.All your question will be feedback immediately.

SAMPLES

If it helpful for the business ,we can provide samples to customer .it is easy to get samples,just send your address ,

phone number and express account number to us ,we will send samples to you as soon as possible.

Favorable rate

100%

Buyer impression

Name

E-mail

Company Name

Content

社媒暂无评论

Professional Industrial Valves Manufacturer

cast iron valve hot-sale industry. Mech Valve

cast iron valve hot-sale industry. Mech Valve

MATERIAL SPECIFICATION