1 check it before the installation, particularly thermal parts; Installation position 2 and it must be near the evaporator, the Industrial Valves should be installed vertically, not tilted or inverted installation; 3, when installation should pay attention to make the liquid inside the heat organization always stay within the heat pack, so thermal bag should be lower than the body was carrying; 4 thermal package installed in the evaporator export levels as much as possible back to the trachea, general should stay away from the compressor suction mouth 1. More than 5 m. 5 thermal package must not be placed in a fluid from tube road; 6 if evaporator export with gas-liquid exchanger, the heat are packing in the evaporator outlet, namely before heat exchanger; 7 thermal package is usually placed on the evaporator muffler, and clingy wall bandage tightly, contact point scale should be clean, bared metal color; 8 when the pipe diameter less than 25 mm, thermal bag can be tied in the back to the top of the trachea; When diameter greater than 25 mm, can be in 45 ° to the underside of the trachea, to prevent the pipe at the bottom of the product oil etc, affect the correct thermal heat packs.
Collectively, the effect of resilient wedge gate valve on industrial society has been to eliminate resilient valve and drastically reduce the time long associated with resilient gate valve.
Shenzhen Mech Valve Trading Co., Ltd. trusts our colleagues as valuable members of our double flanged gate valve and pledge to treat one another with loyalty, respect and dignity.
Although there are various available in the market (such as cast iron valve, os&y valve, and os&y gate valve), recent study results have made this resilient seal gate valve ductile iron gate valve a preferred rising stem gate valve choice of the people.
Our company is professional in selling resilient seated gate valve as well as providing a series of relevant services.