electric cast steel gate valves is cast steel gate valves with Z type control valve electric actuator. In general electric cast steel gate valve in the pipeline can only be fully open and close to cut off the use, not for adjusting and throttling. Electric cast steel gate valve is a valve, use a wide range of general caliber DN≥ 50 mm to cut off the device to choose it, sometimes at the caliber of small cutting device also chooses electric cast steel gate valves.

sealing face has two gate, two of the most commonly used mode gate valve sealing surface form a wedge, the wedge Angle vary with the valve parameters. Wedge gate valve of the damper can be made into a whole, is called a rigid disc; Can also make it generates trace of deformation of ram, in order to improve the manufacturability, make up for the sealing surface Angle in the process of our processing deviation, this damper is called elastic disc.

electric cast steel gate valve is closed, sealing surface can only rely on medium pressure to seal, that depend on medium pressure, the disc will be to the other side of the valve seat sealing surface pressure to ensure that the seal face seal, this is the seal. Most is adopt compulsory seal gate valve, the valve is closed, to rely on outside force forced the ram pressure to the seat, to ensure the sealing surface sealing.

the gate valve, the gate, as with the stem straight line called lifting lever gate ( Also called rising stem gate valves) 。 Usually in lifting lever on the trapezoidal thread, through the valve at the top of the nut and guide groove on the valve body, the rotation movement into linear motion, which is the operating torque thrust into operation.

open valve, when the gate hoisting height is equal to valve size 1:1 times, fluid channels open completely, but at runtime, the position cannot be monitored. Actual use, is the stem apex as a sign, that is fixed position, as its full open position. To consider locking phenomenon in a temperature change, usually in the open to the vertex positions, pour 1/2-1 ring back, as the full open position of the valve. The valve fully open position, therefore, according to the location of the damper ( The itinerary & gt; To determine.

1。 Electric cast steel gate valves are normally used in open - Close the occasion, cannot be used for throttling service.

2。 Electric cast steel gate valves are normally installed in horizontal pipe runs with the stem vertical. Can also be installed in vertical pipeline or of horizontal pipe runs with the stem other than vertical, but according to valve size, application environment and the material details, may require special structure. If the purchase of valves for special installations, when ordering, valve orientation should be noted.

3。 For the application of temperature over 260 ℃ environment, it is suggested that using the flexible or split wedge, avoid wedge stuck due to thermal expansion. This kind of situation in the condition of the valve is closed when cold, and then heated to happen.

4。 When used in high velocity ( Turbulence) Or thermal cycling applications, in order to avoid loosening, threaded seat rings should be lock welded to the body. When ordering, please specify.

5。 After closed electric cast steel gate valve, valve rod should be slightly back ( 1/8 to 1/4 turn) In order to release the stem load. This makes the stem to expand slightly, not stuck or damaging the Industrial Valves and will not affect shutoff.

6。 If the seat ring installation lugs are removed, high integrity shutoff gate valves can be used in the hot water outlet or the use of soft iron pipe system. When ordering, please specify.

7。 Pumping station without being limited by the space to use, the water sundry more easily blocked in the important position of the valve, can use flashlight dual-use gate valve; Conversely butterfly valve can be used, especially with the butterfly valve can be used in the pump room renovation project, in order to effectively use the original pump room space, to improve on the premise of the original pump room area is the same for ( Row) The purpose of the water.

To that end, Shenzhen Mech Valve Trading Co., Ltd. has successfully built a solid foundation and infrastructure for flanged gate valve manufacturing.
To know more about resilient wedge gate valve y gate valve, visit Mech Valve for more reviews, tips and advice. Shenzhen Mech Valve Trading Co., Ltd. won't let you down for your options. visit!
Shenzhen Mech Valve Trading Co., Ltd. provides professional , technology and human expertise clients need to find trusted answers. Go to Mech Valve for answers.
With the market analysts, exports from Shenzhen Mech Valve Trading Co., Ltd. facilities in China will surpass the forecast.
Many of the wedge gate valve listed here can be purchased for less money, but in general we recommend paying a slightly higher price for significantly improved performance. These are our top choices and their recommended configurations.