Best electric valve factory energy

Latest products

Wafer Style Butterfly Valve BS EN 593 (D71X4, D371X4), PN10/16

Lug Butterfly Valve BS EN 593 (D71XL4, D371XL4), PN10/16

Silent Check Valve (HC41X), PN10/16

Spring Check Valve EN 12334 Rubber Disc Swing Check H44J PN10/16

Product Information
Feedback

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material

Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Mech Best electric valve factory energy-1

Z81X

• Connection Ends: Groove to ISO 6182

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550 or painting upon request

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Resilient Wedge Disc	EN-GJS-450-10+EPDM
3	O-Ring	NBR	EPDM
4	Stem	SS420	SS304, SS316, Al-bronze
5	Nut	Carbon Steel Zinc Plated	SS304, SS316
6	Bonnet	EN-GJS-450-10
7	Stem Bushing	Brass Hpb59-1
8	Gland	EN-GJS-450-10
9	Flat Washer	Carbon Steel Zinc Plated	SS304, SS316
10	Stud	Carbon Steel Zinc Plated	SS304, SS316
11	Nut	Carbon Steel Zinc Plated	SS304, SS316
12	Yoke	EN-GJS-450-10
13	Stem Nut	Brass Hpb59-1	Bronze ZQSn5-5-5
14	Washer	Brass Hpb59-1

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

Mech Best electric valve factory energy-2

DN		Dimensions(mm)
Inch	mm	L	H1(Close)	H2(Open)	OD	d	A	B
2"	50	178	257	307	60.3	57.15	15.88	7.92
2.5"	65	190	305	370	73	69.09	15.88	7.92
2.5"	65	190	305	370	76.1	72.26	15.88	7.92
3"	80	203	350	430	88.9	84.94	15.88	7.92
4"	100	229	422	522	114.3	110.08	15.88	9.52
5"	125	254	516	640	139.7	135.48	15.88	9.52
5"	125	254	516	640	141.3	137.03	15.88	9.52
6"	150	267	563	713	165.1	160.90	15.88	9.52
6"	150	267	563	713	168.3	163.96	15.88	9.52
8"	200	292	675	875	219.1	214.40	19.05	11.13

k******s

The fabric of Mech always works best with its design. It is chosen by our designers who have developed the ability comes through observation and experience to find the appropriate fabric for a design. Complete OEM service in Hanway is guaranteed to satisfy customers

n******q

Mech is developed based on scientific theory. The knowledge of electrochemistry and thermodynamics has been applied in it, including electric potential difference, electrochemical polarization, the structure of electrodes, etc. Maintaining a mutually beneficial relationship with customers is a part of our core values

v******s

The patterns on Mech are intended to be tasteful accents that support the shift toward more informal, authentic spaces – while establishing an emotional connection with the user. Creating an atmosphere of trust and recognition to encourage employees is also one of our missions

h******c

The manufacture of Mech is professional and sophisticated. Its production processes including PCB fabrication, heat treatment of electric components, and housing treatment are all done by expert technical workers. Improving the quality of products and wining the market are our ultimate goal

p******e

The random inspection will be carried out on Mech production. Its parameters and specifications will be strictly scrutinized based on the sample or part approved sheet, so as to make sure it meets the quality requirements in the battery industry. We are committed to improving our core value to be more competitive in the market

m******i

Excellent material selection, excellent workmanship, stable performance, reliable quality, waterproof and dustproof, drop-proof and shock-absorbing, long standby time, and long service life.

Name

E-mail

Company Name

Content