Custom 2 inch brass check valve silent manufacturers air conditioning

Latest products

Wafer Style Butterfly Valve BS EN 593 (D71X4, D371X4), PN10/16

Lug Butterfly Valve BS EN 593 (D71XL4, D371XL4), PN10/16

Silent Check Valve (HC41X), PN10/16

Spring Check Valve EN 12334 Rubber Disc Swing Check H44J PN10/16

Product Information
Feedback

Statement

Check valves serve to prevent the backflow of medium in the piping system for protection of important equipments, widely used in the ﬁeld of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, ﬁre protection as well as chemical and energy industry.

Features

◔ Material:Ductile Iron EN-GJS-450-10

Valve body, bonnet, disc are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Fusion bonded epoxy coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Small hydraulic friction loss with reasonable structure design

MATERIAL SPECIFICATION

Mech Custom 2 inch brass check valve manufacturers air conditioning-1

H44J

• Connection Ends: BS EN 1092 PN10/PN16, AS 2129 TABLE E, JIS B2212 10K, BS 10 TABLE D/E

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Bolt	Carbon Steel Zinc Plated	SS304, SS316
3	Washer	Carbon Steel Zinc Plated	SS304, SS316
4	Disc	Carbon Steel + EPDM	Carbon Steel+NBR
5	Bonnet	EN-GJS-450-10
6	Bonnet Gasket	EPDM
7	Plug	Malleable Iron Galvanized	Bronze ASTM B584

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

Mech Custom 2 inch brass check valve manufacturers air conditioning-2

DN		PN	Dimensions(mm)
Inch	mm		L	D	D1	d	C	T	n-φL
2"	50	10/16	203	165	125	99	19	3	4-Φ19
2.5"	65	10/16	216	185	145	118	19	3	4-Φ19
3"	80	10/16	241	200	160	132	19	3	8-Φ19
4"	100	10/16	292	220	180	156	19	3	8-Φ19
6"	150	10/16	356	285	240	211	19	3	8-Φ23
8"	200	10	495	340	295	266	20	3	8-Φ23
		16	495	340	295	266	20	3	12-Φ23
10"	250	10	622	405	350	319	22	3	12-Φ23
		16	622	405	355	319	22	3	12-Φ28
12"	300	10	698	460	405	370	24.5	4	12-Φ23
		16	698	460	410	370	24.5	4	12-Φ28

l******v

The manufacture of Mech involves a wide range of stages. These stages rapid prototypes, PCB fabrication, welding, performance testing, and assembly. Adopting stainless steel as the key materials, it is not easy to crack

j******f

Mech integrates both optical and mechanical designs. Its performance meets the designed specs both during manufacturing and after final assembly. Through hardening treatment, it is sturdy enough

q******l

Mech has been tested by third-party testing organizations. It has been checked in terms of miter edge lamination, polish, flatness, hardness, and straightness. It can function normally even under low temperature and high pressure

q******p

The manufacturing of Mech requires many complicated techniques, mainly includes drying of the incoming timbers or logs, designing the door frame, plating the cross band, laminating the face veneer, etc. It can withstand the corrosion of acid, alkali, and other chemical substances

v******z

The quality of Mech is ensured. It is made by a quality conscious manufacturer who invests good money in conducting different tests, such as vibration test, bursting test, and compression test. It is manufactured to meet international safety requirements

a******n

By using the advanced testing equipment in the product, many quality problems of the product can be detected immediately, thus effectively improving the quality. Adopting high-quality imported stainless steel, it has a long service life

Name

E-mail

Company Name

Content