Custom water supply check valve high quality factory chemical

Latest products

Wafer Style Butterfly Valve BS EN 593 (D71X4, D371X4), PN10/16

Lug Butterfly Valve BS EN 593 (D71XL4, D371XL4), PN10/16

Silent Check Valve (HC41X), PN10/16

Spring Check Valve EN 12334 Rubber Disc Swing Check H44J PN10/16

Product Information
Feedback

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material

Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Mech Custom water supply check valve factory chemical-1

Z81X

• Connection Ends: Groove to ISO 6182

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550 or painting upon request

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Resilient Wedge Disc	EN-GJS-450-10+EPDM
3	O-Ring	NBR	EPDM
4	Stem	SS420	SS304, SS316, Al-bronze
5	Nut	Carbon Steel Zinc Plated	SS304, SS316
6	Bonnet	EN-GJS-450-10
7	Stem Bushing	Brass Hpb59-1
8	Gland	EN-GJS-450-10
9	Flat Washer	Carbon Steel Zinc Plated	SS304, SS316
10	Stud	Carbon Steel Zinc Plated	SS304, SS316
11	Nut	Carbon Steel Zinc Plated	SS304, SS316
12	Yoke	EN-GJS-450-10
13	Stem Nut	Brass Hpb59-1	Bronze ZQSn5-5-5
14	Washer	Brass Hpb59-1

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

Mech Custom water supply check valve factory chemical-2

DN		Dimensions(mm)
Inch	mm	L	H1(Close)	H2(Open)	OD	d	A	B
2"	50	178	257	307	60.3	57.15	15.88	7.92
2.5"	65	190	305	370	73	69.09	15.88	7.92
2.5"	65	190	305	370	76.1	72.26	15.88	7.92
3"	80	203	350	430	88.9	84.94	15.88	7.92
4"	100	229	422	522	114.3	110.08	15.88	9.52
5"	125	254	516	640	139.7	135.48	15.88	9.52
5"	125	254	516	640	141.3	137.03	15.88	9.52
6"	150	267	563	713	165.1	160.90	15.88	9.52
6"	150	267	563	713	168.3	163.96	15.88	9.52
8"	200	292	675	875	219.1	214.40	19.05	11.13

n******f

The quality of Mech can be guaranteed. It is manufactured according to the requirements and standards of the SANYO company. Its raw materials are 100% pure polypropylene from China Petroleum & Chemical Corporation

e******p

Parts of the materials of Mech are purchased directly from suppliers that adhere to the highest environmental and quality standards, ensuring these materials are the most sustainable and healthy available. It is widely used in the home, agriculture, health care, construction, and other industries

d******g

Mech is carefully crafted. It has gone through cutting, sewing, fiber washing, dyeing, combing, finishing, and other production processes. It has tapped into world markets such as Europe, South America, and Southeast Asia

b******a

Customers can be assured of the quality of Mech . This product will go through laboratory testing, field mock-up, and field testing for workmanship quality. It has tapped into world markets such as Europe, South America, and Southeast Asia

c******c

Mech has to go through the necessary tests. It has been tested in terms of strength, ductility impact resistance, hardness, and fracture toughness. Changes can be made to its chemical properties, such as to make it hydrophilic

f******b

has been improved on the basis of the old types and such properties as have been realized. There will not be damage marks after it is folded

Name

E-mail

Company Name

Content