Latest forged steel check valve high quality manufacturers industry

Latest products

Wafer Style Butterfly Valve BS EN 593 (D71X4, D371X4), PN10/16

Lug Butterfly Valve BS EN 593 (D71XL4, D371XL4), PN10/16

Silent Check Valve (HC41X), PN10/16

Spring Check Valve EN 12334 Rubber Disc Swing Check H44J PN10/16

Product Information
Feedback

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material

Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Mech high quality forged steel check valve manufacturers industry-1

Z81X

• Connection Ends: Groove to ISO 6182

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550 or painting upon request

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Resilient Wedge Disc	EN-GJS-450-10+EPDM
3	O-Ring	NBR	EPDM
4	Stem	SS420	SS304, SS316, Al-bronze
5	Nut	Carbon Steel Zinc Plated	SS304, SS316
6	Bonnet	EN-GJS-450-10
7	Stem Bushing	Brass Hpb59-1
8	Gland	EN-GJS-450-10
9	Flat Washer	Carbon Steel Zinc Plated	SS304, SS316
10	Stud	Carbon Steel Zinc Plated	SS304, SS316
11	Nut	Carbon Steel Zinc Plated	SS304, SS316
12	Yoke	EN-GJS-450-10
13	Stem Nut	Brass Hpb59-1	Bronze ZQSn5-5-5
14	Washer	Brass Hpb59-1

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

Mech high quality forged steel check valve manufacturers industry-2

DN		Dimensions(mm)
Inch	mm	L	H1(Close)	H2(Open)	OD	d	A	B
2"	50	178	257	307	60.3	57.15	15.88	7.92
2.5"	65	190	305	370	73	69.09	15.88	7.92
2.5"	65	190	305	370	76.1	72.26	15.88	7.92
3"	80	203	350	430	88.9	84.94	15.88	7.92
4"	100	229	422	522	114.3	110.08	15.88	9.52
5"	125	254	516	640	139.7	135.48	15.88	9.52
5"	125	254	516	640	141.3	137.03	15.88	9.52
6"	150	267	563	713	165.1	160.90	15.88	9.52
6"	150	267	563	713	168.3	163.96	15.88	9.52
8"	200	292	675	875	219.1	214.40	19.05	11.13

b******k

Before delivery, Mech has to undergo a wide range of tests. It is strictly tested in terms of the strength of its materials, statics&dynamics performance, resistance to vibrations&fatigue, etc. Customized catalogs and brochures related to the product are available

h******z

The design of Mech involves many considerations. They may include stress points, support points, yield points, wear resistance capacity, toughness, and friction force. With a simple structure, it only requires easy installation and maintenance

h******h

Mech is strictly assessed after production. Many factors include part tolerances, size limitations, materials properties, mechanical analysis, and function realization have been analyzed. It is made based on the national explosion-proof standard

s******o

Mech is professionally designed considering the following factors: the functionality of the control system, engineering forces, life cycle, utility, and manufacturability.

v******w

Mech has gone through some important production stages. They cover the preparation of raw materials, parts machining, plating and anodizing, assembly, and testing. It is extremely popular in Italy, Brazil, Russia, Spain, Australia, and other overseas countries

a******g

The product doesn't tarnish. A new technique and process called e-coating have been used to keep it shiny. Adopting titanium as one of the materials, it features high strength and stable chemical properties

Name

E-mail

Company Name

Content