Company Advantages
1. Mech Valve hydraulic float valve is of sustainable design. Its structures contribute to Leadership in Environmental and Energy Design (LEED) credits in categories such as: daylighting, innovative design, and reduced and recyclable material usage.
2. electromagnetic control valve from Shenzhen Mech Valve Trading Co., Ltd. sells well in the international market.
3. Thanks to its many advantages, it is certain that the product will have a bright market application in the future.
4. The product has gained a lot of praises from customers all over the world and has a great market application potential.

SK760X Slow Shut Control Valve is a diaphragm type of hydraulic control valve driven by the hydraulic pressure within the piping system, widely applied in the pump outlet for prevention of medium back-flow, pressure fluctuation and water hammer formation. Under normal working conditions, pressure before the valve is higher than pressure after, and the valve remains fully open. When pressure after valve exceeds pressure before valve, the valve is capable to be closed rapidly to prevent backflow of water and protect the pump and piping system. The design of the valve incorporates the function of slow-opening, quick closing, slow closing and water hammer absorption, no large pressure fluctuation within the system.

◔Operational principle

SK760X Slow Shut Control Valve is composed of needle valve, mini strainer and ball valve, etc.

Before the pump starts, there is no pressure before the valve, and disc (5) is closed under the pressure from the spring. With the start of the pump, the pressure before the valve increases gradually. At the same time, the pressure water enters the lower cavity room (2) through the needle valve (1). The two combined force opens the disc of the basic valve rapidly to allow water supply. When the pump stops (as planned or out of accident), pressure before the valve suddenly declines. Pressure after valve exceeds that before the valve. As a result, the higher pressure flows back to the upper cavity room through the needle valve (4) and gets accumulated to drive the membrane down to close the valve disc (5). The pressure within the lower cavity room (2) discharges to the lower pressure area before the basic valve through needle valve (1), which slows down the closing process to prevent formation of water hammer.

The opening and closing speed of the valve can be controlled by adjustment of the needle valve (1) & (4). For this valve, there is also another option with dual disc design, especially good for working in complicated piping system and working conditions where there is tremendous pressure and water back-flow.

◔ Property and advantages

• Driven by pressure of pipe system, work automatically with energy of pipe system to achieve energy conservation and environment protection.

• Controlled by the pilot valve, lower energy consumption, achieve accurate pressure reducing results, have function of stabilizing pressure after the valve.

• Dual cavity design, with functions of fully opening and fully closing. Slow shut causes no pressure fluctuation, and the diaphragm with support is well protected.

• Have internal orifice, connect bottom cavity and outlet of the basic valve, make sure stability of reaction to keep stability of pressure after the valve, avoid any vibration and noise.

• Channel with straight-flow, slight friction loss, no eddy flow and turbulent flow, cut down the damage of cavitation.

• Long pitch orientation design for stem move, stable and no gap resistance.

• Balanced automatically, big gap design on connection of disc and stem, disc is free on the vertical flat against stem, it can balance the tolerance from machining and sealing surface. Good connection without leakage. Achieve functions of both reducing dynamic pressure and reducing static pressure.

• Ductile iron castings with nodularity higher than 90%, foundry in house with advanced melting technology and strict quality control system, testing reports and testing bars can be supplied with order. Records and testing bars maintained for one year in the factory.

• Good corrosion resistance, with stainless steel, copper alloy, rubber made from DuPont and other rust- resisting material, fusion bonded epoxy coating both for interior and exterior surface of the basic valve. All the characteristics in accordance with ANSI/AWWA C550 and other international specifications like WRAS, NSF61.

Company Features
1. Since establishment, Shenzhen Mech Valve Trading Co., Ltd. has specialized in the development, design, and production of electromagnetic control valve . Today we are proud to say that we are one of the leaders in the industry.
2. Mech Valve has introduced imported advanced machines to producing pressure release valve .
3. We are committed to going in compliance with the laws and fulfill obligations and responsibilities. We will deal fairly and equitably with our coworkers, suppliers, outsource partners, and customers. Our company bears social responsibility. We make efforts to use our combined power of innovation, industry, policy, and people to educate the world and our global stakeholders on reducing waste and pollution. We uphold a customer-first strategy. We seek the best way to serve them, listen to them, and improve ourselves to cater to clients' requirements. We are working hard to operate in a manner that protects our environment. We make our emissions to be discharged more reasonably, and encourage production team to utilize resources in a less wasteful way.