approved flanged gate valve hot-sale at discount

Latest products

Wafer Style Butterfly Valve BS EN 593 (D71X4, D371X4), PN10/16

Lug Butterfly Valve BS EN 593 (D71XL4, D371XL4), PN10/16

Silent Check Valve (HC41X), PN10/16

Spring Check Valve EN 12334 Rubber Disc Swing Check H44J PN10/16

Product Information
Feedback

Company Advantages
1. The technologies used in Mech Valve os gate valve is market-based. These technologies including biometrics, RFID, and self-checkouts are evolving constantly. It has fusion bonded epoxy coating in accordance with AWWA C550
2. flanged gate valve will keep innovated with time going by. It is available in a wide range of sizes and materials
3. The product is notable for its high energy efficiency. This product consumes little energy or power to finish its task. Produced with ductile iron material, it provides high strength

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material

Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Mech Valve approved flanged gate valve at discount-1

Z41XB

• Connection Ends: Flange to BS EN 1092-2:1997

• Working Pressure: PN10/PN16 200PSI and 250PSI available upon request

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Resilient Wedge Disc	EN-GJS-450-10+EPDM
3	Stem	SS420	SS304,SS316,Al-bronze
4	Bonnet Gasket	EPDM	NBR
5	Bonnet	EN-GJS-450-10
6	Washer	Brass HPb59-1
7	Yoke	EN-GJS-450-10
8	Nut	Brass HPb59-1
9	Gland	EN-GJS-450-10
10	Stem Nut	Brass HPb59-1
11	Handwheel	EN-GJS-450-10	Pressed Steel
12	Washer	Brass HPb59-1
13	Nut	Carbon Steel Zinc Plated	SS304,SS316
14	Stud	Carbon Steel Zinc Plated	SS304,SS316
15	Flat Washer	Carbon Steel Zinc Plated	SS304,SS316
16	Nut	Carbon Steel Zinc Plated	SS304,SS316
17	O-Ring	NBR	EPDM

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

Mech Valve approved flanged gate valve at discount-2

DN		Dimensions(mm)
Inch	mm	PN	L	H1(Close)	H2(Open)	D	D1	d	C	T	n-φL
2"	50	10/16	178	318	370	165	125	99	19	3	4-Φ19
2.5"	65	10/16	190	343	410	185	145	118	19	3	4-Φ19
3"	80	10/16	203	386	468	200	160	132	19	3	8-Φ19
4"	100	10/16	229	436	538	220	180	156	19	3	8-Φ19
5"	125	10/16	254	516	640	250	210	184	19	3	8-Φ19
6"	150	10/16	267	563	713	285	240	211	19	3	8-Φ23
8"	200	10	292	749	950	340	295	266	20	3	8-Φ23
		16									12-Φ23
10"	250	10	330	904	1158	405	350	319	22	3	12-Φ23
		16					355				12-Φ28
12"	300	10	356	1030	1335	460	400	370	24.5	4	12-Φ23
		16					410				12-Φ28

Company Features
1. With a large production base, Shenzhen Mech Valve Trading Co., Ltd. becomes a highly competitive enterprise in the industry of flanged gate valve .
2. With high technology equipped, Mech Valve is capable for producing popular resilient wedge gate valve .
3. By adopting the first-class technical facilities, Mech Valve endeavors to provide the best. Inquire!

l******d

Before delivery, Mech has gone through a series of analyses. They include the stress analysis of all components, fatigue analysis, load increase analysis, etc. Its adhesive force will not die away after long-time use

b******m

Mech complies with Electromagnetic Compatibility (EMC) standards. It has passed the EMC test in terms of conducted disturbances immunity, power interference, and immunity to induced voltages. The product meets the international high-cleanliness standard

a******o

The safety of Mech is guaranteed by the standards it passed. This product is fabricated complying with EMC standards, electric compatibility standards, and overload protection. No residual viscose will be found on its applied surface after it is torn off

x******g

Mech must go through a series of tests. They include testing for the compliance with the machinery directive, testing for operation safety, and testing for its life expectancy. The product has a great soldering resistance

b******y

The quality of Mech can be guaranteed. It is sent to the reputable third-party quality testing institution which offers certification services for pool and spa component manufacturers in a variety. The product is of stable and reliable performance

y******j

It is produced under strict quality control standards with our state-of-art facilities. It can withstand a great tensile force

Name

E-mail

Company Name

Content