Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.
◔ Material
Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.
◔ Triple O-ring Stem Seals
The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.
◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut
This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.
◔ Fusion Bonded Epoxy Coating
Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.
◔ Long Service Life with Resilient Seat Cycling Test 1,000 times
The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.
• Connection Ends: Flange to BS EN 1092-2:1997
• Working Pressure: PN10/PN16
• Temperature Range: 0℃- 80℃
• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550
Part No. | Part | Standard Specification | Options |
1 | Valve Body | EN-GJS-450-10 |
|
2 | Resilient Wedge Disc | EN-GJS-450-10+EPDM |
|
3 | O-Ring | NBR | EPDM |
4 | Stem | SS420 | SS304,SS316,Al-bronze |
5 | Nut | Carbon Steel Zinc Plated | SS304,SS316 |
6 | Bonnet | EN-GJS-450-10 |
|
7 | Stem Bushing | Brass HPb59-1 |
|
8 | Gland | EN-GJS-450-10 |
|
9 | Flat Washer | Carbon Steel Zinc Plated | SS304,SS316 |
10 | Stud | Carbon Steel Zinc Plated | SS304,SS316 |
11 | Nut | Carbon Steel Zinc Plated | SS304,SS316 |
12 | Yoke | EN-GJS-450-10 |
|
13 | Nut | Brass HPb59-1 |
|
14 | Washer | Brass HPb59-1 |
Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.
DN | Dimensions(mm) | ||||||||||
Inch | mm | PN | L | H1(Close) | H2(Open) | D | D1 | d | C | T | n-φL |
2" | 50 | 10/16 | 178 | 323 | 373 | 165 | 125 | 99 | 19 | 3 | 4-Φ19 |
2.5" | 65 | 10/16 | 190 | 343 | 408 | 185 | 145 | 118 | 19 | 3 | 4-Φ19 |
3" | 80 | 10/16 | 203 | 370 | 450 | 200 | 160 | 132 | 19 | 3 | 8-Φ19 |
4" | 100 | 10/16 | 229 | 442 | 542 | 220 | 180 | 156 | 19 | 3 | 8-Φ19 |
5" | 125 | 10/16 | 254 | 540 | 665 | 250 | 210 | 184 | 19 | 3 | 8-Φ19 |
6" | 150 | 10/16 | 267 | 608 | 758 | 285 | 240 | 211 | 19 | 3 | 8-Φ23 |
8" |
200 | 10 |
292 |
720 |
920 |
340 |
295 |
266 |
20 |
3 | 8-Φ23 |
|
| 16 |
|
|
|
|
|
|
|
| 12-Φ23 |
10" |
250 | 10 |
330 |
940 |
1190 |
405 | 350 |
319 |
22 |
3 | 12-Φ23 |
|
| 16 |
|
|
|
| 355 |
|
|
| 12-Φ28 |
Product Name | High quality stainless steel 10000psi ptfe packing flow control 3/8 throttle socket weld needle valve | ||
Model Number | HY-SWNV | ||
Type | 2 way throttle socket weld needle valve | ||
Working Pressure | 10000psi throttle socket weld needle valve | ||
Working Temperature | -20 degree C to 580 degree C | ||
Application | General | ||
Port Size | 1/4"-1" | ||
Media | oil,gas,water,acid liquid and gas | ||
Temperature of Media | Normal Temperature,high temperature | ||
Material | Stainless steel,carbon steel, monel,brass | ||
Power | Manual | ||
Structure | needle | ||
Standard or Nonstandard | Standard | ||
Certificate | ISO9001:2015 | ||
Sealing & packing | PTFE,RPTFE,VITON,PPL,graphite,copper backing | ||
Delivery Time | 5-30 days | ||
Warranty Period | 18 months after shipment | ||
Connection | throttle socket weld needle valve | ||
Manufacturing Method | Forged |
Copyright © 2021 Guangzhou Weyes Network Technology Co., Ltd. | All Rights Reserved