Company Advantages
1. With time going on, the advantages for gate valve are more obvious and attract more customers.The particles in the fluid are not prone to stick to it due to its internal sheathing
2. Strategically incorporating this product into the room can make a big difference with the atmosphere and the light, creating a soft and warm atmosphere. Its design ensures a good connection without leakage
3. It comes with fine reflectivity. More light is reflected as its fabric has a high thread count and is tightly woven together. It will go through initial debugging tests before delivery for guaranteed quality
4. The product is characterized by its air permeability. A new type of waterproof fabric layer is added, helping absorb any foot sweat and moisture. It has the characteristic of good corrosion resistance
5. It has the required colorfastness. It is able to withstand normal laundering/dry cleaning cycle without color loss. It features moderate to good throttling capability

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

◔ Material

Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

Note: For special material request other than standard specification, please indicate clearly on the inquiry or order list.

Company Features
1. Shenzhen Mech Valve Trading Co., Ltd. has several production lines to mass manufacture Shenzhen Mech Valve Trading Co., Ltd..
2. We have got various kinds of awards issued by the government such as the advanced enterprise of the quality management system. This means our quality and business reliability are recognized by the Chinese government.
3. We never stop searching for sustainable growth. We support more sustainable production patterns by reducing the environmental impact of our products.