resilient wedge gate valve ,resilient seated valve

Product Information
Customer Reviews

Company Advantages
1. resilient wedge gate valve 's structure has been developed using resilient seated valve idea. It complies with international speciﬁcations such as NSF61
2. It offers significant development advantages compared to others. It has fusion bonded epoxy coating in accordance with AWWA C550
3. resilient wedge gate valve produced by our company has the advantage over the others on resilient seated valve . It delivers excellent resistance to different types of oils and grease

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material:Ductile Iron EN-GJS-450-10

Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Z41X

• Connection Ends: Flange to BS EN 1092-2:1997

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Resilient Wedge Disc	EN-GJS-450-10+EPDM
3	Stem	SS420	SS304,SS316,Al-bronze
4	Bonnet Gasket	EPDM	NBR
5	Bonnet	EN-GJS-450-10
6	Washer	Brass HPb59-1
7	Yoke	EN-GJS-450-10
8	Stem nut	Brass HPb59-1
9	Gland ﬂange	EN-GJS-450-10
10	Wedge nut	Brass HPb59-1
11	Handwheel	EN-GJS-450-10	Pressed Steel
12	Washer	Brass HPb59-1
13	Nut	Carbon Steel Zinc Plated	SS304,SS16
14	Stud	Carbon Steel Zinc Plated	SS304,SS16
15	Flat Washer	Carbon Steel Zinc Plated	SS304,SS16
16	Nut	Carbon Steel Zinc Plated	SS304,SS16
17	O-Ring	NBR	EPDM

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

DN		Dimensions(mm)
Inch	mm	PN	L	H1(Close)	H2(Open)	D	D1	d	C	T	n-φL
2"	50	10/16	178	318	370	165	125	99	19	3	4-Φ19
2.5"	65	10/16	190	343	410	185	145	118	19	3	4-Φ19
3"	80	10/16	203	386	468	200	160	132	19	3	8-Φ19
4"	100	10/16	229	436	538	220	180	156	19	3	8-Φ19
5"	125	10/16	254	516	640	250	210	184	19	3	8-Φ19
6"	150	10/16	267	563	713	285	240	211	19	3	8-Φ23
8"	200	10	292	749	950	340	295	266	20	3	8-Φ23
		16									12-Φ23
10"	250	10	330	904	1158	405	350	319	22	3	12-Φ23
		16					355				12-Φ28
12"	300	10	356	1030	1335	460	400	370	24.5	4	12-Φ23
		16					410				12-Φ28
14"	350	10	381	1210	1560	520	460	429	26.5	4	16-Φ23
		16					470				16-Φ28
16"	400	10	406	1280	1680	580	515	480	28	4	16-Φ28
		16					525				16-Φ31
18"	450	10	432	1760	2210	640	565	530	30	4	20-Φ28
		16					585	548			20-Φ31
20"	500	10	457	1780	2280	715	620	582	31.5	4	20-Φ28
		16					650	609			20-Φ34
24"	600	10	508	1950	2550	840	725	682	36	5	20-Φ31
		16					770	720			20-Φ37

Company Features
1. Advanced production machine is the reliable guarantee of Shenzhen Mech Valve Trading Co., Ltd.'s product quality.
2. Shenzhen Mech Valve Trading Co., Ltd.'s goal is to gradually develop from a small industry to a large industry. Welcome to visit our factory!

Favorable rate

100%

Buyer impression