Wholesale water gate valve durable Supply industry

Latest products

Wafer Style Butterfly Valve BS EN 593 (D71X4, D371X4), PN10/16

Lug Butterfly Valve BS EN 593 (D71XL4, D371XL4), PN10/16

Silent Check Valve (HC41X), PN10/16

Spring Check Valve EN 12334 Rubber Disc Swing Check H44J PN10/16

Product Information
Feedback

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material

Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Mech Valve durable water gate valve Supply industry-1

Z41X

• Connection Ends: Flange to ASME B16.1 CL 125

• Working Pressure: 300PSI 200PSI and 250PSI available upon request

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	ASTM A536,65-45-12
2	Resilient Wedge Disc	ASTM A536,65-45-12+EPDM
3	Stem	AISI 420	AISI 304, AISI 431, AISI 316, Al-bronze
4	Bonnet Gasket	EPDM	NBR
5	Bonnet	ASTM A536,65-45-12
6	Washer	Brass Hpb59-1
7	Yoke	ASTM A536,65-45-12
8	Stem Bushing	Brass Hpb59-1
9	Gland	ASTM A536,65-45-12
10	Stem Nut	Brass Hpb59-1	Bronze ZQSn5-5-5
11	Handwheel	ASTM A536,65-45-12	Pressed Steel
12	Washer	Brass Hpb59-1
13	Gland Nut	Carbon Steel Zinc Plated	AISI 304, AISI 316
14	Stud	Carbon Steel Zinc Plated	AISI 304, AISI 316
15	Flat Washer	Carbon Steel Zinc Plated	AISI 304, AISI 316
16	Nut	Carbon Steel Zinc Plated	AISI 304, AISI 316
17	O-Ring	EPDM	NBR

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

Mech Valve durable water gate valve Supply industry-2

DN		Dimensions(mm)
Inch	mm	L	H1(Close)	H2(Open)	D	D1	C	n-ΦL
2"	50	178	318	370	152	120.7	16	4-Φ19.1
2.5"	65	190	343	410	178	139.7	17.5	4-Φ19.1
3"	80	203	386	468	191	152.4	19.1	4-Φ19.1
4"	100	229	436	538	229	190.5	19.1	8-Φ19.1
5"	125	254	516	640	254	215.9	19.1	8-Φ22.2
6"	150	267	576	730	279	241.3	19.1	8-Φ22.2
8"	200	292	749	950	343	298.5	22.2	8-Φ22.2
10"	250	330	904	1158	406	362	23.8	12-Φ25.4
12"	300	356	1030	1335	483	431.8	25.4	12-Φ25.4

q******u

After fine processing technology, the surface is smooth, the thickness is uniform, the corners are flat, and it is easy to lay.

q******j

The texture is hard and thick, comfortable and delicate to the touch, the surface is flat and smooth, and the texture is clear and natural, which is both beautiful and practical.

q******b

It is made of high-quality and environmentally friendly raw materials, and is manufactured with fine processing technology. It is fine in workmanship, high in quality, and reliable in quality. It is a correction stationery that integrates beauty, practicality, and environmental protection.

v******u

Designed in accordance with the concept of ergonomics, light in weight, comfortable to hold, good in control, and very convenient to use.

k******u

Selected high-quality materials, using advanced manufacturing technology Seiko manufacturing, energy saving and environmental protection, high quality, and very stable and reliable operation, without any noise during the work process.

u******z

The inner tank is made of high-quality stainless steel, and the power cord is thickened with industrial-grade electricity standards. It not only has the characteristics of anti-corrosion and anti-oxidation, but also has the advantages of heat resistance and softening resistance, making it safer to use .

Name

E-mail

Company Name

Content