antic pressure sustaining valve relief at discount piping system

Latest products

Wafer Style Butterfly Valve BS EN 593 (D71X4, D371X4), PN10/16

Lug Butterfly Valve BS EN 593 (D71XL4, D371XL4), PN10/16

Silent Check Valve (HC41X), PN10/16

Spring Check Valve EN 12334 Rubber Disc Swing Check H44J PN10/16

Product Information
Feedback

Enterprise Strength

Nowadays, Mike Valve has a nationwide business range and service network. We are able to provide timely, comprehensive and professional services for the vast number of customers.

Product Details

With the dedication to pursue excellence, Mike Valve strives for perfection in every detail.Mike Valve provides diversified choices for customers. valve manufacturer is available in a wide range of types and styles, in good quality and in reasonable price.

Company Advantages
1. Thanks to the design of our professional team, the pressure sustaining valve has been widely popular in this industry.
2. The product has stable performance, good usability, and reliable quality, which has been approved by the authoritative third party.
3. Regular product quality audit is carried out to ensure reliable product quality.
4. As long as the product is properly installed and in good working order, people are totally assured that it is safe and secure to use without dangers.

Statement

SK750X Remote Float Control Valve is a diaphragm type of hydraulic control valve driven by the hydraulic pressure within the piping system, designed with adjustable parallel ﬂoat. The valve is capable to maintain the water surface at set position despite the ﬂuctuation of ﬂow rate and widely applied where there is water reservoir or water box for injection of water.

Features

◔Operational principle

Mech Valve relief pressure sustaining valve at discount piping system-1

SK750X Remote Float Control Valve is controlled by angle valve, ﬂoat and ball lever, and equipped with needle valve, mini strainer and ball valve, etc.

Under normal conditions, water ﬂow comes continuously from the inlet opening to the upper cavity room

(2) of the basic valve through the needle valve (1); When the ﬂoat is not reaching the set position, the angle valve 4 remains open. The water that enters the upper cavity room of the basic valve discharges into the water tank and no accumulation within. Under this condition, the disc of the basic valve remains open at the water pressure from the inlet opening to allow water supply to the water tank. With the raising of the water surface, the ﬂoat (6) gradually raises and closes the angle valve (4). Pressure gets accumulated within the upper cavity room and drives the membrane down to close disc and the basic valve gradually. When the water surface reaches the set position, the angle valve close completely and so with the basic valve and the water supply stops. When water position declines, the pressure within the upper cavity room gets released through the angle valve and the basic valve opens to continue with water supply.

Needle valve (1) serves to control the closing speed of the valve to prevent formation of water hammer; In case the ﬂoat is not working, ball valve (3) can close the basic valve for emergency cut-off.

◔ Property and advantages

• Driven by pressure of pipe system, work automatically with energy of pipe system to achieve energy conservation and environment protection.

• Controlled by the pilot valve, lower energy consumption, achieve accurate pressure reducing results, have function of stabilizing pressure after the valve.

• Dual cavity design, with functions of fully opening and fully closing. Slow shut causes no pressure ﬂuctuation, and the diaphragm with support is well protected.

• Have internal oriﬁce, connect bottom cavity and outlet of the basic valve, make sure stability of reaction to keep stability of pressure after the valve, avoid any vibration and noise.

• Channel with straight-ﬂow, slight friction loss, no eddy ﬂow and turbulent ﬂow, cut down the damage of cavitation.

• Long pitch orientation design for stem move, stable and no gap resistance.

• Balanced automatically, big gap design on connection of disc and stem, disc is free on the vertical ﬂat against stem, it can balance the tolerance from machining and sealing surface. Good connection without leakage. Achieve functions of both reducing dynamic pressure and reducing static pressure.

• Ductile iron castings with nodularity higher than 90%, foundry in house with advanced melting technology and strict quality control system, testing reports and testing bars can be supplied with order. Records and testing bars maintained for one year in the factory.

• Good corrosion resistance, with stainless steel, copper alloy, rubber made from DuPont and other rust- resisting material, fusion bonded epoxy coating both for interior and exterior surface of the basic valve. All the characteristics in accordance with ANSI/AWWA C550 and other international speciﬁcations like WRAS, NSF61.

Mech Valve relief pressure sustaining valve at discount piping system-2

SK750X

Notes for installation and debugging

• All the Pressure Reducing Valves have been finished initial debugging tests before delivery. Further dubugging test is also suggested during using according to different working conditions. After the pipe system becomes stable, please loose the adjusting screw on the top of pilot valve to the top- most position.

• After the pipe system becomes stable, please loose the adjusting screw on the top of pilot valve to the top- most position.

• Tighten adjusting screw of pilot valve in clockwise slowly. When outlet pressure increase to the set pressure please fasten the locknut under the adjusting screw.

• If go beyond the set pressure during adjusting, please repeat the above steps. Remember, pressure can be only adjusting from low level to high level and pay attention to make the adjusting slowly.

Typical installation illustration

Mech Valve relief pressure sustaining valve at discount piping system-3

◔Technical Parameter

Accuracy of Surface Control: ±25mm

Common problems and proposed solutions

Common Problems	Proposed Solutions
Basic valve does not close when water meets speciﬁed level and continue to supply water.	a.Check if any sundries on the sealing surface of basic valve or pilot valve. b.Check if any damage on the sealing surface of basic valve or pilot valve. c.Check if block on lever of controlling angle valve. d.Check if ball lever has been corrosive and ﬂoat missing. e.Check if any damage for diaphragm. During the checking, please close ball valve (3), if the basic valve was closed, please just disregard method of a, b and e and only check sealing surface of angle valve and ball lever. If the basic valve does not close when close ball valve (3), please cut off the water supply and check sealing surface of basic valve, diaphragm and stem. If any damaged parts, please change new one.
Level adjusting is not accurate and ﬂoat jumps strongly.	a.Check if the ﬂoat was installed close to water outlet. If yes, please move it to far away from the water outlet. Or you can use barrel to avoid the affection of the wave. b.Check the location of ﬂoat and make sure the top-most position which ﬂoat can catch is the set-level of the water box.
Reasonable suggestion	To make sure water won't exceed set-level double insurances is recommended. That's to assemble two position two-way solenoid valve before the controlling angle valve to make sure that the valve can be closed in case of emergency.

Company Features
1. The performance of Shenzhen Mech Valve Trading Co., Ltd. has surpassed many other suppliers of pressure sustaining valve in today's market. The company is now gradually developing into a leader in this field.
2. Shenzhen Mech Valve Trading Co., Ltd. boasts its technology strength.
3. With sticking to the idea of striving for perfection, Mech Valve will continually create more values for our customers. Ask online! Shenzhen Mech Valve Trading Co., Ltd. insists on sustainable development. Ask online! Mech Valve aims to be a professional remote float control valve manufacturer who can offer the best service. Ask online!

y******s

Every Mech is professionally designed by our experienced design team. This product has the advantage of impact resistance

g******n

When designing Mech , the design team invests plenty of time in market research and designs a product that is more superior than others. The brightness of the product can be adjusted to adapt to different driving environments

f******s

Premium raw materials: Mech is made of high quality raw materials. They are supplied by our reliable partners who have signed contracts and established cooperation relationship with us for over years. This product excels in its excellent heat dissipation

o******h

Mech shows the outstanding performance, after years of improvement in the production process. The production process is managed in an efficient manner and therefore this product is produced at a quick rate. Thanks to built-in its heat dissipation device, the product features high conversion efficiency

o******p

Excellent craftsmanship: Mech is crafted with excellent craftsmanship which is a result of talents and skills. Its superior craftsmanship makes it high quality. The product is specially designed for the car lighting system

h******h

The product is very durable. Made of hard materials, it is less likely to be affected or destroyed by any surrounding element. This product featuring a high color rendering index

Name

E-mail

Company Name

Content