flow control valve ,resilient valve

Product Information
Customer Reviews

Application Scope

The Industrial Valves Manufacturer of Mike Valve is applicable to the following areas.Mike Valve is committed to producing quality Industrial Valves and providing comprehensive and reasonable solutions for customers.

Company Advantages
1. Mech Valve flow control valve is designed with the innovative concept.
2. This product has some referential value as it has a reasonable design. .
3. One of our customers said: 'With ultraviolet protection, the product has the ability to keep my guests protected from the sun, wind, and rain.'

Statement

Gate valves serve to cut the medium flow in the piping system, widely used in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, fire protection as well as chemical and energy industry.

Features

◔ Material

Ductile Iron ASTM A536, 65-45-12
Body, bonnet, wedge, handwheel and operating nut are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Triple O-ring Stem Seals

The lower O-ring isolates the stem thrust collar bearing area from the waterway. The upper two O-rings can easily be replaced in the line while the valve is under pressure in the open position.

◔ Stainless Steel Stem, Brass Thrust Collar and Bronze Wedge Nut

This life-tested MEIDE design has repeatedly proven its superior strength and abrasive resistance.

◔ Fusion Bonded Epoxy Coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Long Service Life with Resilient Seat Cycling Test 1,000 times

The Valve has been subjected to 1,000 cycles of operation at a maximum rate of 6 cycles of operation per minute from fully closed to fully open and from fully open to fully closed positions under cycled hydrostatic pressure.

MATERIAL SPECIFICATION

Z41X

• Connection Ends: Flange to ASME B16.1 CL 125

• Working Pressure: 300PSI 200PSI and 250PSI available upon request

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	ASTM A536,65-45-12
2	Resilient Wedge Disc	ASTM A536,65-45-12+EPDM
3	Stem	AISI 420	AISI 304, AISI 431, AISI 316, Al-bronze
4	Bonnet Gasket	EPDM	NBR
5	Bonnet	ASTM A536,65-45-12
6	Washer	Brass Hpb59-1
7	Yoke	ASTM A536,65-45-12
8	Stem Bushing	Brass Hpb59-1
9	Gland	ASTM A536,65-45-12
10	Stem Nut	Brass Hpb59-1	Bronze ZQSn5-5-5
11	Handwheel	ASTM A536,65-45-12	Pressed Steel
12	Washer	Brass Hpb59-1
13	Gland Nut	Carbon Steel Zinc Plated	AISI 304, AISI 316
14	Stud	Carbon Steel Zinc Plated	AISI 304, AISI 316
15	Flat Washer	Carbon Steel Zinc Plated	AISI 304, AISI 316
16	Nut	Carbon Steel Zinc Plated	AISI 304, AISI 316
17	O-Ring	EPDM	NBR

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

DN		Dimensions(mm)
Inch	mm	L	H1(Close)	H2(Open)	D	D1	C	n-ΦL
2"	50	178	318	370	152	120.7	16	4-Φ19.1
2.5"	65	190	343	410	178	139.7	17.5	4-Φ19.1
3"	80	203	386	468	191	152.4	19.1	4-Φ19.1
4"	100	229	436	538	229	190.5	19.1	8-Φ19.1
5"	125	254	516	640	254	215.9	19.1	8-Φ22.2
6"	150	267	576	730	279	241.3	19.1	8-Φ22.2
8"	200	292	749	950	343	298.5	22.2	8-Φ22.2
10"	250	330	904	1158	406	362	23.8	12-Φ25.4
12"	300	356	1030	1335	483	431.8	25.4	12-Φ25.4

Company Features
1. By providing quality flow control valve at a reasonable price, Shenzhen Mech Valve Trading Co., Ltd. has been widely acknowledged in the worldwide industry.
2. Made by the most advanced machine, the quality of flanged gate valve can be guaranteed.
3. Mech Valve determines to be the leading resilient valve manufacturer in accordance with the spirit of gate valve . Inquire now! Shenzhen Mech Valve Trading Co., Ltd. persists in the cast iron valve service philosophy. Inquire now! Oriented by ductile iron gate valve ,Mech Valve exclusively manages the business. Inquire now!

ABOUT US