New 2.5 inch check valve wafer company energy control

Latest products

Wafer Style Butterfly Valve BS EN 593 (D71X4, D371X4), PN10/16

Lug Butterfly Valve BS EN 593 (D71XL4, D371XL4), PN10/16

Silent Check Valve (HC41X), PN10/16

Spring Check Valve EN 12334 Rubber Disc Swing Check H44J PN10/16

Product Information
Feedback

Statement

Check valves serve to prevent the backflow of medium in the piping system for protection of important equipments, widely used in the ﬁeld of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, ﬁre protection as well as chemical and energy industry.

Features

◔ Material:Ductile Iron EN-GJS-450-10

Valve body, bonnet, disc are all produced in ductile iron material which provides guarantee for high strength and good corrosion resistance.

◔ Fusion bonded epoxy coating

Fusion bonded epoxy coating in accordance with ANSI/AWWA C550 for both interior and exterior surface which provides reliable corrosion resistance.

◔ Small hydraulic friction loss with reasonable structure design

MATERIAL SPECIFICATION

Mech wafer 2.5 inch check valve company energy control-1

H44X, H44T

• Connection Ends: Flange to BS EN 1092-2:1997

• Working Pressure: PN10/PN16

• Temperature Range: Rubber Seal: 0℃- 80℃
Metal Seal: -10℃- 350℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550 or painting upon request

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Seat Ring	Bronze ASTM B62 C83600/ZQSn5-5-5 (Pressed Fit)	AISI 304, AISI 316 Pressed Fit or Threaded
3	Disc	EN-GJS-450-10+EPDM
4	Clapper Arm	EN-GJS-450-10
5	Washer	SS420
6	Nut	Carbon Steel Zinc Plated	SS304, SS316
7	Hinge Pin	SS420
8	Bonnet Gasket	EPDM	Graphite+Steel
9	Bolt	Carbon Steel Zinc Plated	SS304, SS316
10	Washer	Carbon Steel Zinc Plated	SS304, SS316
11	Bonnet	EN-GJS-450-10
12	Plug	Malleable Iron Galvanized

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

Mech wafer 2.5 inch check valve company energy control-2

DN		Dimensions(mm)
Inch	mm	L	D	D1	D2	C	T	n-φL
2"	50	120	165	125	99	19	3	4-Ø19
2.5"	65	135	185	145	118	19	3	4-Ø19
3"	80	155	200	160	132	19	3	8-Ø19
4"	100	165	220	180	156	19	3	8-Ø19
5"	125	190	250	210	184	19	3	8-Ø19
6"	150	210	285	240	211	19	3	8-Ø23
8"	200	260	340	295	266	20	3	12-Ø23
10"	250	285	405	355	319	22	3	12-Ø28
12"	300	315	460	410	370	24.5	4	12-Ø28

v******k

The production of Mech adopts the principle of lean production method. The product is very easy to maintain

r******m

Innovative design concept: the design concept of Mech is put forward and completed by a team of designers who are full of innovative design ideas. These ideas not only meet the industrial standards but cater to the market demands. The product has passed the CE certification

z******p

Monitored production process: the production process of Mech is strictly and constantly monitored. A 24 hours shift system is carried out to ensure high-efficiency production. The product has passed the CE certification

k******q

Owing to the years of industrial experience, Mech is elaborately manufactured in an accurate and effective way. The product has the merit of full traceability

s******f

Mech is manufactured at a quick rate due to the high efficiency of production equipment. The product works very stably, which helps meet users' production schedules

l******z

Exquisite material selection, exquisite craftsmanship, fast transmission speed, strong code reading ability, strong and durable, durable, and can also support barcode reading on electronic screens (such as: mobile phones, tablets, computers).

Name

E-mail

Company Name

Content