New pressure rating of valves top selling for business drainage

Company Advantages
1. Mech pressure rating of valves will be carefully inspected for its workmanship. It will be scrutinized in seaming (open seam, sufficient seam allowance, seam slippage, etc.), stitching (needle cutting, snared stitches, blind stitches, etc.), and washing (washing effect, cleaning mark, etc.) It can be furnished with different types of internal trim and seals to accommodate varied service media
2. Shenzhen Mech Valve Trading Co., Ltd. can supply samples and accept the trial order with small quantity. The rigorous construction and materials give it a higher level of safety
3. The product has the desired security. All the weak points have been reinforced by professional workmanship to offer guaranteed safety when in use. It is used extensively in the automation, oil & gas industries
4. This product meets the requirements of safe use. Safety testing has been performed based on mechanical design/performance, the intent of the product, the conditions of use and more. Its ability to keep pressure stability avoids vibration and noise
5. The product is highly resistant to deformation and burst. It is made of quality materials that can stand up to load and heavy weight. It has fusion bonded epoxy coating in accordance with AWWA C550

Statement

Resilient centerline butterﬂy valves usually serve to cut off medium ﬂow in the piping system, widely applied in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, ﬁre protection as well as chemical and energy industry. The design of the butterﬂy valves, however, makes it also suitable to serve as adjusting valve.

Features

◔ Material

Body and lever are all produced in ductile iron material (EN-GJS-450-10) which provides guarantee for high strength and good corrosion resistance. Different options of the disc and seat, e.g. disc of DI nickel or nylon 11 coated, different series of stainless steel, Al-bronze, seat in EPDM, NBR or Fluororubber, makes it suitable to be applied under different working conditions.

◔ Design

Universal ﬂange connection to BS EN 1092 PN6/10/16, ASME B16.1 CL 125, ASME B16.5 CL 150, GB9113, JIS B2112 10K, AS 2129 Table E, BS 10 Table D/E.

Different options of operation including lever handle, gear box, gear box with tamper switch, electric drive, and pneumatic drive, etc.

Different options of rubber seat including insert rubber seat, rubber vulcanized on valve body and boot rubber seat.

◔ Coating

Fusion bonded epoxy coating of valve body and lever provides reliable corrosion resistance.To achieve higher corrosion resistance, factory is also able to supply Nylon 11 coated disc. Nylon 11 coating is thermoplastic plant coating approved by USDA with high corrosion resistance and antisepsis which can be applied where there is strict requirement for anti- corrosion.

MATERIAL SPECIFICATION

New pressure rating of valves top selling for business drainage-1

D71XL4, D371XL4

• Design Standard: BS EN 593

• Connection Ends: BS EN 1092 PN10/PN16

• Top Flange Standard: ISO 5211
Stem drive by keys, parallel or diagonal square or ﬂat head

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Seat	DN40~400: EPDM & Backing DN450~750: EPDM Vulcanized on Valve Body	NBR/Fluororubber&Backing EPDM/NBR Vulcanized on Valve Body Soft Seat in EPDM/NBR
3	Disc	EN-GJS-450-10	SS304, SS316, AL-Bronze C95400
4	Stem	DN50~350: SS420, One-Piece Stem Design DN400~750: SS431, Two-Piece Stem Design	SS304, SS316, SS416, SS431
5	O-Ring	NBR	EPDM
6	Bushing	DN40~350: Nylon 1010 DN400~750: Lubricating Bronze	PTFE
7	Lever	EN-GJS-450-10	Aluminum
8	Shaft Cover (DN400~750)	EN-GJS-450-10
9	Gear Box	Cast Iron EN-GJL-200	EN-GJS-450-10

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

New pressure rating of valves top selling for business drainage-2

DN		Dimensions(mm)
Inch	mm	A	B	V	C	ØD	Ø2	ØK	G	L	ØD1	N-M	ISO 5211	Ø3	H	H1	H2	P
											PN16
1.5"	40	138	64.5	32	33	43.9	14	90	9.45	267	110	4-M16	F07	150	206	158	52	43.5
2"	50	140.5	64.5	32	43	53.9	14	90	9.53	267	125	4-M16	F07	150	206	158	52	43.5
2.5"	65	153	72	32	46	65.2	14	90	9.53	267	145	4-M16	F07	150	206	158	52	43.5
3"	80	157.5	86	32	46	79.7	14	90	9.53	267	160	8-M16	F07	150	206	158	52	43.5
4"	100	176	100	32	52	105	16	90	11.14	267	180	8-M16	F07	150	206	158	52	43.5
5"	125	191	112	32	56	130	16	90	11.14	267	210	8-M16	F07	150	206	158	52	43.5
6"	150	202.5	128	32	56	156	20	90	12.7	267	240	8-M20	F07	150	206	158	52	43.5
8"	200	243.5	162	45	60	206.7	26	125	20.6	356	295	12-M20	F10	300	310	239	69	62.5
10"	250	273	194	45	68	253.3	26	125	20.6	490	355	12-M24	F10	300	310	239	69	62.5
12"	300	311	223	45	78	301.9	28	125	22.1	490	410	12-M24	F10	300	307	229	73	77.5
14"	350	340	267	48	78	333.9	31.6	150	22.1	-	470	16-M24	F12	300	307	229	73	77.5
16"	400	400	319.5	48	102	389.6	33.2	175	27	-	525	16-M27	F14	380	418	288	110	120

Company Features
1. Shenzhen Mech Valve Trading Co., Ltd. specializes in the research, development, production and market of pressure rating of valves products.
2. The company has brought together a team of excellent R&D professionals. Their development knowledge enables them to turn clients' ideas into high quality and differentiated finished products.
3. In an environment that encourages initiative, fosters teamwork, recognizes effort, and rewards success, we offer equal opportunity and fair compensation for all.

h******v

The production of Mech adopts the highest standards in the industry. JLH mattresses have been exported to over 106 countries and regions including Europe, America, etc

z******m

Mech is developed incorporating sophisticated technology and is made available to patrons at market leading prices. Manufactured by strict quality control, each mattress is highly recommended

s******i

Mech is produced introducing the world-class technology and equipment.

o******f

The superior design of Mech shows the great creativity of our designers. Hand-tufted mattress is good enough that could be rolled and compressed in a box

b******e

Mech is made of well-selected materials and has a innovative and aesthetic design. JLH products have passed CFR 1633 and BS 7177

a******d

It is appreciated for its thermal overload protection system. There is a heat output channel that forces the heat out to protect the product from overheat. Hand-tufted mattress is good enough that could be rolled and compressed in a box

Name

E-mail

Company Name

Content