Self-reliance type pressure steam regulating valve during installation need to pay attention to the details of the

self-reliance type pressure steam regulating valve is a kind of self-reliance type regulator, because do not need other foreign energy such as electricity, gas, only by the medium energy to drive itself, is not only energy-saving environmental protection, easy to use, after the installation is set pressure value can be put into automatic operation, so the control accuracy is not high, and the lack of electricity, gas, has been more and more widely used.

however, self-reliance type steam pressure regulator should also correct selection and correct installation, use, to ensure that after put into operation without any problem. Selection aspects such as regulating valve is used to control valve pressure before and after Industrial Valves pressure, the medium is normal temperature or high temperature, with or without corrosion, high working pressure, and so on will not do more introduced, must be clear beforehand, we mainly introduces the installation issues. Because recently met a column type themselves problems, the use of steam pressure regulator is typical.

self-reliance type steam pressure regulator is used in steam pipe, put into use in just one or two months, the user is hot. To the scene, a large number of steam from the self-help type of pressure regulating valve film head vent out, noise big, honking. The cause of the accident was apparently steam without head and burned the diaphragm condenser directly into the membrane.

for steam pipeline of self-reliance type steam pressure regulating valve, the installation must be between actuators and piping with a condenser, head can not allow the steam into the actuator membrane, and self-reliance type steam pressure regulator must be installed upside down, the condenser is higher than film head, must first use the ling condenser and membrane head filled with water. Look at the site of the installation, researchers asked the field instruments, these are no problem, what reason is caused? Head-scratching puzzlement. Then carefully inquired a operator, has no intention of under learned that after the regulator is installed, put into use, the condenser and membrane has been intermittent water head between the joint. Turned out to be such, leaking inversion of condenser water slowly light-leaking, steam will head into the membrane, burned the diaphragm.

Shenzhen Mech Valve Trading Co., Ltd. highlighted the need to foster a human openness to technological innovation.
Shenzhen Mech Valve Trading Co., Ltd. are a market-focused, process-centered organization that develops and delivers innovative solutions to our customers, consistently outperforms our peers, produces predictable earnings for our customers, and provides a dynamic and challenging environment for our employees.
Shenzhen Mech Valve Trading Co., Ltd. is a initial company that supports expertise in searching marketing solutions.