outline for the function of the steam trap, the energy conservation measures, operation, maintenance management and so on various aspects what are the specific requirements. ( 1) Eliminate not leak steam condensate. Eliminate condensation from time to time don't leak steam trap is the most basic conditions. Therefore, although it is ruled out and steam separation and accumulated water device, but it is not called the condensate trap, and called the steam trap. Action accurate, sensitive trap refers to the condensate have open and shut case. Excluding water, drain valves, rapid emissions; At the end of the discharge and closed quickly and prevent precious steam leakage. This is the main performance of trap. That is to say, only full open and close two trap, if the switch is slow, switch does not reach the designated position, will cause the throttling effect, easy trap overall damage, at the same time also is the leading cause of leakage of steam. As above, the action of steam traps in principle is fully open or close, open and close action. Depending on the type, also may have two types, that is, continuous and intermittent discharge. ( 2) Can rule out all the condensate steam system in any place. Must be able to trap can rule out the use of equipment of steam is high and accurately piping, heat exchanger, such as the main device and any part of the condensate steam system. ( 3) Can discharge air and water at the same time. Mixed with steam equipments in the air, the original is mixed in the steam, the steam into water when it is separated out. The formation of air layer on the surface of the heat transfer in steam using equipment, seriously affect the heat conduction, air must therefore be ruled out. ( 4) Apply pressure range. For trap, if the pressure changes its performance is affected slightly, even stop movement is not, in this case you need it performance is not affected, and can adapt to any pressure. Also asked that the back pressure of the steam trap is permissible. ( 5) Easy to repair and maintenance. The requirements and trap structure. The trap has simple structure, less moving parts. In order to make the Industrial Valves movement components do not produce stress, should be the day to choose appropriate materials, more important is its structure is easy to be processed. In a word, the steam trap shall not set full-time personnel on management regular maintenance work, that is to reduce the maintenance cost. ( 6) High practicability. Trap should be small volume, light weight, high service life, low price, and don't loss due to air or steam barrier drainage capacity, air air blocking and steam vapor lock and other accidents.

Getting doesn't have to be expensive, time-consuming, or difficult. It all comes down to the right method and a os & y valve fire protection water gate valve in place.
Always do our research, follow the rules and plans ahead for additional expenses. Expanding is the goal of Shenzhen Mech Valve Trading Co., Ltd.; expanding properly is the goal of the wise business.
You can get more information from Mech Valve for on sale. welcome to visit us and send your inquiry!
Knowing what promotions are popular and get the most activity as resilient seated gate valve from current and potential customers can play a role in your overall strategy.