Company Advantages
1. Mech Valve pressure adjustment valve has passed the necessary tests. These tests include noise emission testing, hygiene testing, EMC testing, functional safety testing, and insulating material testing.
2. The product has good quality and reliable performance.
3. By using this product, business owners will less likely to witness workplace accidents and workman’s compensation claims.
4. The product is easy for people to control and only needs a little workforce. This will help lower operating costs.

SK735X Surge Anticipating Valve is a diaphragm type of hydraulic control valve driven by the hydraulic pressure within the piping system. The valve dissipates surges caused by power failure to pumps. The valve anticipates the surge by opening on low line pressure associated with sudden stopping of pumps. This assures that the valve is open when the return high pressure surge arrives.

Pressure from the header is directed to the bonnet of the Closing Speed Control, keeping the main valve closed if there is no flow through the two pilot valves. When one of the pilot valves opens and there is more flow out of the bonnet than is coming in, the main valve opens.

◔Operational principle

The valve is closed when the line pressure is between the set points of the two pilots. The valve opens when the line pressure drops below the setting of Low Surge Pilot. The valve also opens when the line pressure exceeds the setting of High Surge Pilot.

Main Valve is normally open when pressure is applied to the valve inlet. When this same pressure is applied ipating Valve.

to the bonnet, the Main Valve closes tight because the area of the diaphragm is greater than the area of the seat. Pressure above the diaphragm determines the position of the Main Valve.

Bonnet pressure is controlled with a pilot circuit consisting primarily of the following items:

1.A pilot line from the header to the bonnet including parts composed of Strainer etc.

2.Two pilot lines from the Main Valve bonnet through the outlet of the Main Valve.
Pressure from the header is directed to the bonnet of the Closing Speed Control, keeping the main valve closed if there is no flow through the two pilot valves. When one of the pilot valves opens and there is more flow out of the bonnet than is coming in, the main valve opens.
Pressure from the header is directed to the bonnet of the Closing Speed Control, keeping the main valve closed if there is no flow through the two pilot valves. When one of the pilot valves opens and there is more flow out of the bonnet than is coming in, the main valve opens.

◔ Property and advantages

• Driven by pressure of pipe system, work automatically with energy of pipe system to achieve energy conservation and environment protection.

• Controlled by the pilot valve, lower energy consumption, achieve accurate pressure reducing results, have function of stabilizing pressure after the valve.

• Dual cavity design, with functions of fully opening and fully closing. Slow shut causes no pressure fluctuation, and the diaphragm with support is well protected.

• Have internal orifice, connect bottom cavity and outlet of the basic valve, make sure stability of reaction to keep stability of pressure after the valve, avoid any vibration and noise.

• Channel with straight-flow, slight friction loss, no eddy flow and turbulent flow, cut down the damage of cavitation.

• Long pitch orientation design for stem move, stable and no gap resistance.

• Balanced automatically, big gap design on connection of disc and stem, disc is free on the vertical flat against stem, it can balance the tolerance from machining and sealing surface. Good connection without leakage. Achieve functions of both reducing dynamic pressure and reducing static pressure.

• Ductile iron castings with nodularity higher than 90%, foundry in house with advanced melting technology and strict quality control system, testing reports and testing bars can be supplied with order. Records and testing bars maintained for one year in the factory.

• Good corrosion resistance, with stainless steel, copper alloy, rubber made from DuPont and other rust- resisting material, fusion bonded epoxy coating both for interior and exterior surface of the basic valve. All the characteristics in accordance with ANSI/AWWA C550 and other international specifications like WRAS, NSF61.

Company Features
1. Shenzhen Mech Valve Trading Co., Ltd. is one of the largest pressure relief valve manufacturer in China.
2. Our good quality remote float control valve is made by pressure adjustment valve .
3. Being focused on a healthier and more productive world, we will keep socially and environmentally conscious in the future operation. We pledge that we won't engage in any practices or activities that breach relevant competition or antitrust laws. We will never do something that harms customers and competitors, such as offering inferior or highly over-charged products. We are committed to sustainable development. In addition to the good feelings we gain, our sales have actually increased through our good works. This unexpected benefit comes because people were impressed with our job and wanted to work with a company with such responsibility.