1, the working medium of solenoid valve should be clean and no impurity particles, electromagnetic trims on the surface of the dirt and filters, need to clean on a regular basis. 2, install solenoid coil up, and keep the vertical position, the arrow or mark in the solenoid valve should be consistent with the pipe flow, shall not be installed in places with splashing water or water leakage. 3, water solenoid valve solenoid valve before installation, the pipe must be clean. The installation of the filter in front of the valve is recommended, steam pipe installation steam trap. 4, in the pipeline system, installed on the branch of the solenoid valve size should be less than the main valve. 5, and electromagnetic valves cannot be used in explosion hazard. 6, can't install the valve in the pipeline of dips, lest because of steam condensation water, impurities precipitation within the valve and prevent action. 7, the electromagnetic Industrial Valves failure occurs, in order to timely isolation solenoid Industrial Valves, and ensure the normal operation of the system, the best install bypass device. 8, water electromagnetic valve in the pipeline under rigid recommend to use before the Industrial Valves pipe bracket, so as to avoid electromagnetic valve caused by vibration while working. With solenoid valve, water before installation, pay attention to see the product sign, read the instruction for use, to determine whether a product conforms to the conditions of use. 10, water use electromagnetic valve should be installed on the pipeline before and after the pressure gauge, in order to observe the pipe pressure.

As we have known for quite some time, the success of Mech Valve in the future will depend greatly on our ability to strike a balance between valuable human insight and interaction with technology.
Shenzhen Mech Valve Trading Co., Ltd. will provide branded products and services of superior quality and value that improve the lives of the world’s consumers.
resilient wedge gate valve has a very good repute over the global market.
Shenzhen Mech Valve Trading Co., Ltd. expects to reach the desired profits in the first year and does not anticipate serious cash flow problems.
We began investing in our workforce and negotiated deals with major suppliers and providers to lower the cost of equipment so the technicians could enhance the competitiveness of water gate valve right away.