High-quality water butterfly top selling factory for potable control

Statement

Resilient centerline butterﬂy valves usually serve to cut off medium ﬂow in the piping system, widely applied in the field of potable water, water supply and drainage, sewage disposal, irrigation, air conditioning, ﬁre protection as well as chemical and energy industry. The design of the butterﬂy valves, however, makes it also suitable to serve as adjusting valve.

Features

◔ Material

Body and lever are all produced in ductile iron material (EN-GJS-450-10) which provides guarantee for high strength and good corrosion resistance. Different options of the disc and seat, e.g. disc of DI nickel or nylon 11 coated, different series of stainless steel, Al-bronze, seat in EPDM, NBR or Fluororubber, makes it suitable to be applied under different working conditions.

◔ Design

Universal ﬂange connection to BS EN 1092 PN6/10/16, ASME B16.1 CL 125, ASME B16.5 CL 150, GB9113, JIS B2112 10K, AS 2129 Table E, BS 10 Table D/E.

Different options of operation including lever handle, gear box, gear box with tamper switch, electric drive, and pneumatic drive, etc.

Different options of rubber seat including insert rubber seat, rubber vulcanized on valve body and boot rubber seat.

◔ Coating

Fusion bonded epoxy coating of valve body and lever provides reliable corrosion resistance.To achieve higher corrosion resistance, factory is also able to supply Nylon 11 coated disc. Nylon 11 coating is thermoplastic plant coating approved by USDA with high corrosion resistance and antisepsis which can be applied where there is strict requirement for anti- corrosion.

MATERIAL SPECIFICATION

High-quality water butterfly top selling factory for potable control-1

D71X4, D371X4

• Design Standard: BS EN 593

• Connection Ends: BS EN 1092 PN10/PN16, AS 2129 TABLE E, JIS B2212 10K, BS 10 TABLE D/E

• Top Flange Standard: ISO 5211
Stem drive by keys, parallel or diagonal square or ﬂat head

• Working Pressure: PN10/PN16

• Temperature Range: 0℃- 80℃

• Coating: Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

Part No.	Part	Standard Speciﬁcation	Options
1	Valve Body	EN-GJS-450-10
2	Seat	DN40~400: EPDM & Backing DN450~750: EPDM Vulcanized on Valve Body	NBR/Fluororubber&Backing EPDM/NBR Vulcanized on Valve Body Soft Seat in EPDM/NBR
3	Disc	EN-GJS-450-10	SS304, SS316, AL-Bronze C95400
4	Stem	DN50~350: SS420, One-Piece Stem Design DN400~750: SS431, Two-Piece Stem Design	SS304, SS316, SS416, SS431
5	O-Ring	NBR	EPDM
6	Bushing	DN40~350: Nylon 1010 DN400~750: Lubricating Bronze	PTFE
7	Lever	EN-GJS-450-10	Aluminum
8	Shaft Cover (DN400~750)	EN-GJS-450-10
9	Gear Box	Cast Iron EN-GJL-200	EN-GJS-450-10

Note: For special material request other than standard speciﬁcation, please indicate clearly on the inquiry or order list.

High-quality water butterfly top selling factory for potable control-2

DN		Dimensions(mm)
Inch	mm	A	B	V	C	ØD	Ø2	ØK	G	L	ØD1	N-Ø1	ISO 5211	Ø3	H	H1	H2	P
1.5"	40	138	64.5	32	33	43.9	14	90	9.45	267	110	4-Ø19	F07	150	206	158	52	43.5
2"	50	140.5	64.5	32	43	53.9	14	90	9.53	267	125	4-Ø19	F07	150	206	158	52	43.5
2.5"	65	153	72	32	46	65.2	14	90	9.53	267	145	4-Ø19	F07	150	206	158	52	43.5
3"	80	157.5	86	32	46	79.7	14	90	9.53	267	160	8-Ø19	F07	150	206	158	52	43.5
4"	100	176	100	32	52	105	16	90	11.14	267	180	8-Ø19	F07	150	206	158	52	43.5
5"	125	191	112	32	56	130	16	90	11.14	267	210	8-Ø19	F07	150	206	158	52	43.5
6"	150	202.5	128	32	56	156	20	90	12.7	267	240	8-Ø23	F07	150	206	158	52	43.5
8"	200	243.5	162	45	60	206.7	26	125	20.6	356	295	12-Ø23	F10	300	310	239	69	62.5
10"	250	273	194	45	68	253.3	26	125	20.6	490	355	12-Ø28	F10	300	310	239	69	62.5
12"	300	311	223	45	78	301.9	28	125	22.1	490	410	12-Ø28	F10	300	307	229	73	77.5
14"	350	340	267	48	78	333.9	31.6	150	22.1	-	470	16-Ø28	F12	300	307	229	73	77.5
16"	400	400	319.5	48	102	389.6	33.2	175	27	-	525	16-Ø31	F14	380	418	288	110	120
18"	450	422	345.4	48	114	441	38.1	175	27	-	585	20-Ø31	F14	380	418	288	110	120
20"	500	480	380	70.2	127	492.4	41.2	210	-	-	650	20-Ø34	F16	380	465	215	123	185
24"	600	562	441	70.2	154	592.8	50.6	210	-	-	770	20-Ø37	F16	380	500	215	129	185
Inch	mm	A	B	V	C	ØD	Ø2	ØK	G	L	ØD1	N-Ø1	ISO 5211	Ø3	H	H1	H2	P
											PN10
28"	700	575	505	70.2	165	695	63.4	300	-	-	840	24-Ø31	F25	380	543	213	132	218
30"	750	660	550	70.2	165	744	63.4	300	-	-	-	-	F25	380	543	213	132	218

r******p

Mech is scientifically designed. Its design incorporates a variety of technologies that take into account operator safety, machine efficiency, and operating costs. All the products are of good thermal conductivity

u******c

Specific tests for Mech have been conducted. These tests are tear strength testing, abrasion resistance testing, dimensional stability testing, comfort and breathability testing, and stain resistance testing. Made of stainless steel hex nuts, the surface of the light is durable and rust-free

r******a

The manufacturing process of Mech is complicated. This process involves preparing the pattern, stitching, lasting (forming the final shoe) and final assembly. Made of the die casting aluminium alloy, the product has a good metal texture

s******c

The chemical analysis of Mech will be carried out by a QC team. The azo dyes, PH value, formaldehyde content and lead content were evaluated. The product has excellent physical and mechanical properties such as heat resistance

n******n

The design of Mech is of professionalism and trend-orientation. It is carried out by designers who have a lively curiosity for trends in the furniture field, materials, and technologies. Easy installation is the feature of the product

t******o

It has a tight weave that prevents hair from weaving itself into the fabric, which is a common problem for fabrics with coarser weaves. Thanks to the adoption of the aluminum alloy, the product is waterproof

Name

E-mail

Company Name

Content