Butterfly valve opening and the flow rate, the relationship between the linear basically percentage changes. If is used to control the flow, the flow characteristic and pipe flow resistance have close relationship, such as two install Industrial Valves pipe diameter and form all the same, and the pipe loss coefficient is different, the flow valves will be a big difference. 

如果阀门处于节流幅度较大状态，阀板的背面容易发生气蚀，有损坏阀门的可能，一般均在15° External use. 

蝶阀处于中开度时，阀体与蝶板前端形成的开口形状以阀轴为中心，两侧形成完成不同的状态，一侧的蝶板前端顺流水方向而动，另一侧逆流水方向而动，因此，一侧阀体与阀板形成似喷嘴形开口，另一侧类似节流孔形开口，喷嘴侧比节流侧流速快的多，而节流侧阀门下面会产生负压，往往会出现橡胶密封件脱落。 

蝶阀操作力矩，因开度及阀门启闭方向不同其值各异，卧式蝶阀，特别是大口径阀，由于水深，阀轴上、下水头差所产生的力矩也不容忽视。 In addition, the Industrial Valves inlet side bend, form the bias current, torque will be increased. Due to water flow of the opening of the valve is in the middle moment, operators need to be self-locked.

Mech Valve can also foster research that is more useful and influential in society at large.
For more tips and strategies on effective cast iron valve solutions, get your choice at Mech Valve.
The unique connections between flanged gate valvemanufacturing and customers happen when you find ways to relate on a more personal and engaging level that goes beyond a product.
Technology upgrades can pay for themselves quickly by improving resilient seated gate valve and enabling employees to accomplish more in less time. It may be time to focus on resilient gate valve to ensure they run smoothly and efficiently.