fluorine-butterfly regulating valve in use process due to the principle of medium, sometimes cause sticking or congestion, fluorine-butterfly regulator cannot work normally, at this time, you should avoid it happened, or to deal with it, introduce a few kinds of methods below, only supplies the reference:

cleaning method pipeline welding slag, rust, pulp are under the throttle mouth, guiding parts, Industrial Valves cover balance hole blocked or stuck valve core surface, guide surface strain and scratches, seal surface indentation, etc. This often happens in the early new operation system and put into operation after overhaul. This is the most common fault. Encounter this situation, it is necessary to remove for cleaning, remove the slag content, such as the sealing surface damage should also grinding; At the same time open the bottom plug to flush out from under the balance hole fall into the residue inside the valve cover, and the pipeline to wash. Before put into operation, let the lining fluoride valve fully open, the medium flows into normal operation again after a period of time.

external flushing method for some easy to precipitate, medium containing solid particles using ordinary valve adjustment, often at the throttle mouth jam, guide, can the cover bottom plug in an external erosion gas and steam. When the valve is blocked or jammed, open an external gas or steam valve, can be in the case of fixed fluorine-butterfly regulator do wash, make the normal operation of Industrial Valves. Installation of pipeline strainer

method

fluorine-butterfly regulator of small diameter, especially ultra-small flow fluorine-butterfly regulating valve, the throttling clearance, small, medium can't have a little residue. Blockage in the situation, the best pipe on the installation of a strainer in front of the valve, to ensure that the media to go through. Locator using fluorine-butterfly regulator, locator is not normal work, the pneumatic throttle mouth blockage is the most common fault. With locator at work, therefore, must deal with gas source, usually adopts the way is in front of the locator air pipe installed on the air filtering pressure reducing valve increases

throttling clearance method such as solid particles in the medium or washed off in pipe welding slag and rust due to pass the throttle mouth such as congestion, jam, such as fault, can convert the throttle gap big throttling parts & ndash; Throttling area of a window, open the valve core and the sleeve, rather than the circumference of a circle because of the throttling area of concentration distribution, fault can easily be ruled out. If you are single, two-seat valves can change the plunger type valve core to & quot; V' Shape of the mouth valve core, or into a sleeve valve, etc. Such as a chemical plant has a two-seat valves often gets stuck, recommend to switch to the sleeve valve, problem be solved immediately.

medium flushing method USES the scouring of medium energy, wash and take things easy to precipitate, easy to jam, thus improve the function of valve stem. Common methods include: (1) flow into closed type use; (2) adopts streamlined body; (3) puts throttling mouth wash the worst place, using this method to pay attention to improve the throttling parts material erosion resistant ability.

direct to the Angle

the pass-through for S flow, flow complex, upper and lower chamber should dead zone, provides the medium of precipitation. Angle connection, flows through 90 ℃ medium like elbow, washing performance is good, dead zone is small, easy, designed to streamline. Therefore, using the pass-through fluorine-butterfly regulator slight jams can be used to Angle Industrial Valves.

Shenzhen Mech Valve Trading Co., Ltd. shows how effective market design can encourage participation, reduce gaming, and aggregate information, in order to improve liquidity, efficiency, and equity in markets.
Shenzhen Mech Valve Trading Co., Ltd. intends to make enough profit to generate a fair return for our investors and to finance continued growth and development in gate valve.
Deeper connections between Shenzhen Mech Valve Trading Co., Ltd. and customers can be made when we're thinking out of the box and meeting outside of manufacturing work.