High temperature characteristics of the electromagnetic valve, high temperature resistant, use a metal hard seal, improved the use temperature. Wear-resisting, reasonable material selection, Industrial Valves cup and guide suites qiao seconds of fluid lubrication, reducing wear and tear. High-temperature solenoid valve installation: 1, install solenoid coil up, and keep the vertical position, the arrow or mark in the solenoid valve should be consistent with the pipe flow, shall not be installed in a splash of water or water leakage place 2, the working medium of solenoid valve should be clean and no impurity particles, electromagnetic trims on the surface of the dirt and filters, need to clean on a regular basis. 3, the electromagnetic valve failure occurs, in order to timely isolation solenoid valve, and ensure the normal operation of the system, the best install bypass unit 4, in the pipeline system, installed on the branch of the solenoid valve size should be less than the main valve. 5, before install the solenoid valve, pipe must be clean. The installation of the filter in front of the valve is recommended, steam pipe installation steam trap. 6, can't install the valve in the pipeline of dips, lest because of steam condensation water, impurities precipitation within the valve and prevent action. 7, cannot be used in explosion hazard. 8, under the condition of insufficient rigidity pipeline, recommend to use before the valve pipe bracket, so as to avoid electromagnetic valve caused by vibration while working. 9, before installation, pay attention to see the product sign, read the instruction for use, to determine whether a product conforms to the conditions of use. 10, the electromagnetic valve should be installed on the pipeline before and after the pressure gauge, in order to observe the pipe pressure. High-temperature solenoid valve used to maintain 1, it is recommended to use the unit hold people accountable for use and maintenance. 2, the electromagnetic valve is installed to pass into the medium experiment several times, confirmed rear can put into normal use. 3, should be cleaned regularly inside and outside the valve and bit off the dirt, be careful not to damage the sealing surface. 4, electromagnetic valve, a long time without manual valve before the valve should be closed, restart, the electromagnetic valve of steam condensed water should be ruled out clean, and try several times, to switch to normal rear can put into use. 5, electromagnetic valve need not when, from the internal and parts should be stored wiping clean with compressed air blowing off. 6, use for a long time, such as between piston and the valve seat seal, piston sealing surface can be smooth again, again and seat grinding. 7, work, pay attention to before and after the valve pressure gauge, the required working pressure shall not exceed the rated pressure, working pressure difference must be within the rated pressure difference. When working pressure over the rated pressure or differential pressure over the rated pressure difference, the solenoid valve to stop using manual valve before and after the closing, in order to avoid electromagnetic valve explosion and leakage.
Clouds of os&y gate valve failures surround the world of os & y valve fire protection in particular, simply because people don’t pay as much attention to the wedge valve as they should do.
Shenzhen Mech Valve Trading Co., Ltd. offers the best products, high-quality services and innovative technology.
Shenzhen Mech Valve Trading Co., Ltd. are trained to think about problems and coming up with solutions, as well as presenting the whole idea in a logical and coherent manner.
To derive the optimal value out of os gate valve water gate valve for your home, make sure they're purchased from a globally certified organization to ensure quality in use. Such an offer can be found at Mech Valve.
Shenzhen Mech Valve Trading Co., Ltd. can reassign work or shuffle around assigned tasks if one team member is overwhelmed while others are not, more effectively managing resources on the fly. With detailed overviews and reports, manufacturers also can more easily stay abreast of new developments.