Manual valve, is through the valve handle, hand wheel operation, is one of the types of equipment to use the common pipe valve. Its handle, the handwheel clockwise rotation direction is closed, counterclockwise to open it. But there are also individual valve opens and the open instead. Therefore, before the operation should pay attention to check the opening and closing again after operation. The handwheel, handle on the valve is designed according to the normal human, therefore, on the Industrial Valves use regulations, does not allow the operator with the lever and long wrench open or close the valve. The handwheel, the diameter of the handle ( Length) < Diameter of 320 mm, allows individuals to operate only, & gt; 320 mm wheel, allowing two people common operation, or allowing a person with the appropriate lever ( Is generally not more than 0. 5 m in length) operation. But the diaphragm valve, clip pipe valve, non-metallic valves are levers or long wrench operation, is strictly prohibited conduct does not allow, close the valve. Gate and globe valves, such as closed or open end ( The bottom dead center or the top dead center) Turn 1/4 to 1/2 turn, make the thread a better seal, good operation, in order to avoid the & # 353; Too tight, the damage to the valve. Some operators used to use leverage and long wrench operation, think that the bigger the closing force, the better, it's not. This will cause premature valve damage, and even lead to accidents.
Shenzhen Mech Valve Trading Co., Ltd.'s products comply fully with all compatible producing regulations.
To understand how efficiently works, go to Mech Valve for more information.
Loyalty programs provide an opportunity to learn the preferences of customers and design communication strategies that will resonate with wedge valve.
Knowing what promotions are popular and get the most activity as rising stem gate valve from current and potential customers can play a role in your overall strategy.