Hydraulic control valve is a hydraulic control valve, hydraulic control valve consists of a main valve and attached catheter, pilot valve, needle valve, ball valve and pressure gauge, etc. Depending on the purpose, function and place can be turned into a remote-controlled floating ball valve, relief valve, slow close check valve, flow control valve, relief valve, hydraulic electric control valve, water pump control valve, etc. Hydraulic control valve should be installed before the filter, and should facilitate the discharge of pollutants by requirements. Use water hydraulic control valve is a kind of self embellish body, do not need to add oil lubrication, in case of damage of main parts in the valve, please follow the instructions below to remove: 1. The main valve before and after the first side gate valve closed. 2. The piping on the main valve cover joint screw loosening, pressure release valve. 3. All the screws removed, including controlling necessary pipeline brass nut. 4. Take the cover and spring. 5. To get off axis core, diaphragm, piston, do not damage the diaphragm (6). Remove the above things, after check the diaphragm, and o-rings for damage; If no damage do not again points to its internal parts. 7. If any damage found diaphragm or o-rings, please loose the nut on the axis core, get to decompose the diaphragm or circle, comes out to replace the new diaphragm or o-rings. 8. To examine in detail the main valve internal seat, shaft core whether have damage, if there are other debris inside the main Industrial Valves to clear it. 9. Combination is in reverse order will replace the parts after installed the main valve, no jam phenomenon should be the valve. Note: in general consumption in the valve damage for diaphragm and o-rings, other internal parts damage.
Nowadays, it is very common for us to utilise in cast iron valve. And the quality of is decisive to production efficiency.
Shenzhen Mech Valve Trading Co., Ltd. attaches great importance to customers and assists them in achieving their demands.
Shenzhen Mech Valve Trading Co., Ltd. harnesses science and technology to create products that support safer and healthier living and that enhance the overall quality of life.
Shenzhen Mech Valve Trading Co., Ltd.'s wedge gate valve are sturdy, easy to operate, friendly work machines that deliver high-quality os & y valve fire protection for resilient seated valve purposes.
But loyalty programs aren't just a boon for customers – Mech gets access to tons of valuable data for opt-in marketing campaigns.