【 L type and T type three way valve working principle of the dynamic figure 】 factory technical personnel will be held today for introduce this paragraph 2 of the 3-way valve selection and through the working principle of the dynamic figure to introduce in detail.

the 3-way valve working principle: the 3-way valve mainly include L and T. The difference between them is that T can make three orthogonal pipes unicom and cut off the third passage, shunt, rivers. L can only connect two orthogonal pipes, can't keep the third pipeline connected at the same time, only assigned role.

confluence T for the two into a three-way valve, this structure is generally suitable for mixed together in two different conditions, such as the inlet pressure is less than the outlet different or need to add the check valve in front of the valve. Shunt T for a three-way valve into two out, this structure is commonly used in the three way valve, the valve is used

the 3-way valve selection: three-way valve is used in medium or mixed line differences, due to the continuous increase of industrial demand, for tee flow control function is also increasing. On the market for this type of valve the main flow control valve with three-way ball valve and tee. Three-way ball valve is suitable for engineering in water, gas pipeline, vacuum system of large diameter valves use. Three-way valve is the high temperature, high corrosive medium, the demand flow control accurately the conditions of as a choice for three-way regulating Industrial Valves.

body has three to take over the mouth, is suitable for the three directions of fluid line control system, mostly used in the temperature of the heat exchanger ratio adjustment, adjustment and by-pass adjustment.

should be paid attention to in the use of fluid temperature difference shoulds not be too large, usually small and 150 ℃, otherwise it will make the three-way valve produces large stress, or you will make the three-way valve produces large stress caused by the deformation, joint leakage or damage.

three-way valve has three links confluence valve diverter valve two types, and tee tee confluence valve as medium from the two input flows into the mouth after mixed by a export flow, three links as medium by a triage valves entrance flow into, is divided into two export flow out.

Shenzhen Mech Valve Trading Co., Ltd. is recognized as one of the leading manufacturer of in China.Trust in us and make Shenzhen Mech Valve Trading Co., Ltd. your resilient wedge gate valve supplier. Our products will bring more economic value to you.
Shenzhen Mech Valve Trading Co., Ltd. is an expert when it comes to rising stem gate valve. Got some flow control valve problems that you want to address? Visit us now and we'll help you fix those problems ASAP. Go to Mech Valve for more details.
The os&y gate valve flanged gate valve is also available as a cast iron gate valve.
There are ample scientific evidence of reducing the risk of os gate valve.