In thermal power industry, the use of the control valve working condition of a special, simplified, electricity only water, steam cycle processes, but in this process to choose control valve is both simple and complex. Simple is simple process medium, only two kinds of water and steam, water is complex and steam temperature and pressure range is big, bring a series of problems such as: flashing, cavitation, erosion, corrosion, noise. But the first thing to consider is safety and reliability of the control valve.

1, the feed valve ( Lord, attached to the boiler feed water valve, compound feed water regulator)

control requirements: control boiler into the water to ensure steam evaporation, maintain boiler water level ( Lord, enclosed type boiler feed water valve system contains two control valves, one for the boiler starts to use, a water supply for normal use.

condition: boiler startup pressure valve 100 - general 300 kilograms, flow is small, when normal operation of the pressure difference is small, large flow, flow adjustable ratio of 75:1 ~ 100:1. requirements: WCB/WC9, for double valve cavitation resistance starting valve in the system requirements, to V closed ranks, the complex characteristics of the utilization of feed valve need to trim at the same time meet the needs of the boiler startup and normal operation. General valve selection for the failure.

2, boiler feed pump minimum flow circulation valve

control requirements: the start and stop the operation of the boiler feed pump, eliminate because flow is too small, temperature increase, water pump cavitation damage. Old power stations have to use the minimum flow control valve switch type, as well as the use of mechanical pump valve automatic cycle.

conditions: 160 - pressure drop 350 kilograms, is the largest power station in the system under differential pressure Industrial Valves, flow rate of 30% of normal flow.

valve requirements: resistance to cavitation, block structure, grade V seal level, the pump start and stop running when the valve work continuously, pump normal boot after the valve closed, valve is usually a failure.

3, high-low heater drain valve ( Feed water heater hydrophobic, condensed water heater drain)

control requirements: control the location of condensed water heater, timely will condensate discharge, high water discharge, the normal water level of hydrophobic. Situation:

conditions of saturated water, heater control valve pressure difference between the average is 6 - 30 kg, the last level of trap connected directly to the condenser or deaerator. requirements: resistance to flash scour, V or VI levels of seal, valve is usually a failure.

4, deaerator water level control valve

control requirements: provide traffic maintain the normal water level, deaerator eliminated by adding steam temperature gas dissolved in the water.

condition: startup phase flow is small, large pressure differential temperature, normal flow, small pressure difference, working condition of similar feed valve. requirements: effective during low flow resistance to cavitation.

5, desuperheating Industrial Valves ( Attemperator)

control requirements: the high pressure water injection into the steam to steam temperature control requirements.

conditions: water, large pressure difference Industrial Valves requirements: a variety of types: type nozzle, auxiliary atomization type, self-contained type and type to the clamp.

6, (the temperature and pressure-releasing valve High and low pressure bypass valve)

control requirements: the high temperature and high pressure steam to adjust to a certain temperature and pressure of steam, to provide a turbine bypass channel, boiler turbine and work independently.

conditions: high temperature and high pressure steam, valve requirements: thermal shock, noise reduction, response quickly.

Most places have a few choices when it comes to resilient valve resilient seated gate valve distributors, but it can sometimes be difficult to find the right supplier for your needs. The quality of gate valve is critical to resilient seal gate valve.
Shenzhen Mech Valve Trading Co., Ltd. strives to reflect the highest ethical standards in our relationships with members, providers, and shareholders.
Forging an tight connection starts with understanding your potential customers and catering to their needs on resilient wedge gate valve, both with a quality product and impactful resilient seated valve.