revisit stainless steel gate valve plate and valve body structure

stainless steel gate is in all types of valves on modern industry one of the most widely used. This type of valve, the valve body like gate plate content in matching two seat between vertical and fluid movement, so as to open or cut off the flow. Use it as a globe, and the whole flow when fully open, the medium run minimal pressure loss.

know stainless steel gate valve gate:

wedge single ram:

simple structure more flexible gate valve;

under the high temperature, sealed performance is not as good as elastic slide valve or double gate Industrial Valves;

is suitable for the medium of high temperature anti-coking.

flexible disc:

wedge special form of single ram. When compared with wedge gate valve, high temperature, good sealing performance, when heated and ram is not easy to get stuck; Applicable to steam and oil, oil and gas in high temperature medium, and is suitable for frequent switch parts. Should not be used for easy coked medium. Double ram:

a wedge gate valve is good seal performance, such as sealing surface Angle and cooperate to be not very accurate seat, still has good sealing;

after the disc sealing surface wear, the spherical centers at the bottom of the metal pad can be used for thicker, generally don't have to be surfacing welding and grinding seal face, this single ram, flexible disc hard;

parts more than other forms of gate valve;

in addition to the applicable to steam, oil and other media, also applies to the switch area of frequent and the sealing surface wear large medium, should not be used for easy coked medium.

stainless steel gate valve can be divided into the full size of the duct flow in a valve body type and reducing type two kinds. Runner diameter and nominal valve menstruation and basically the same for all sizes, Circulation pore size smaller than nominal valve is given. it is called reducing type. Reducing uniformly reducing evenly and reducing costs are two kinds. Flow in cone tube is a kind of non-uniform shrinkage, this kind of valve inlet side aperture is basically the same as the nominal diameter, then gradually narrowed, to seat down to a minimum.

by reducing flow channel, its advantage is the same specifications of the valve, can reduce the size of the ram, opening and closing force and moment; The disadvantage is that flow resistance increases, the pressure drop and increase energy consumption, so the shrinkage cavity shoulds not be too big. For cone tube reducing, the seat of the ratio of the diameter and nominal diameter, usually take 0. 8 - 0. 95. Nominal diameter less than 250 mm of the reducing valve, the valve seat diameter than nominal diameter reduce a commonly; Nominal diameter equal to or greater than 300 mm of reducing valve, the valve seat diameter is generally lower leg than the nominal size.

double flanged gate valve is an inevitable and critical part of being a manufacturer, and it's more complicated than just manufacturing products and serving customers.
If you would like to solve your os gate valve problem by adopting a . Shenzhen Mech Valve Trading Co., Ltd., an experienced and professional peovider having won high reputation globally will be your bast choice. You won't be disappointed
ductile iron gate valve has obtained many affirmation in the market. Undoubtedlly, our customers are totally satisfied with our products.
flow control valve is sold in oversees market and has high reputation. Besides, our products are sold with reasonable prices.