A, pneumatic ball Industrial Valves installations unprincipled requirements of this device, the motor should be in level state, the electric box cover in a horizontal or vertical state for the recommended installation form, it is good for soothing, debugging, maintenance and manual operation. When installation should guarantee the space required for the disassembly parts installation maintenance inspectors removing debugging shall not damage the sealing surface, sealers and explosion-proof electric explosion-proof surface, and should be coated with anti-rust oil on the surface of the explosion. Second, pneumatic ball valve pneumatic head using note 1, shall not be in the explosive environment down electric lid charged debug electric actuator, opened the electric box cover, must cut off power supply. 2, window opening may not collide with hard objects. 3, shall not be in the rainy day in outdoor open electrical box cover, motor sealing parts, etc. 4, after inspection and maintenance, should be the electric box cover, motor and other sealing parts cover tightly fastened, in case of rain, moisture, corrosion caused by electrical component failure and parts. 5, installation or after reshipment, electric operation for the first time, must check Industrial Valves is in middle position, direction, must be conducted in accordance with the requirements of debugging mode, item by item check for normal parts, can be put into use. 6, this device adopts three-phase motor, valve for rated continuous working hours must not exceed 10 minutes, installation and debugging must pay attention to, in case the motor overheating. When the Industrial Valves is rarely used, it shall make regular start check electric actuator system.
Whenever you grab your remote and turn on the TV, there are numerous ads promoting wedge gate valve and offering for resilient valve extracts, which are said to boost os & y valve fire protection.
Shenzhen Mech Valve Trading Co., Ltd. is working with the best teams, aligned with international standards and practices to focus on R&D and manufacture of products, and are continuously launching new products in the market. Get to know us at Mech Valve.
This is crucial when you need to maintain innovative information in flow control valve.