according to open the relief valve disc height can be divided into micro enlightening the safety Industrial Valves and the safety valve, raise safety valve opening stroke height is: & le; 0. 05d0( Minimum discharge throat diameter) ; Rev. All safety valve opening height is & le; 0. 25 d0 ( Minimum discharge throat diameter) 。

the relief Industrial Valves installation maintenance and matters needing attention of the relief valve is a safety valve, the open-close part under the action of external force in a normally closed state, when the equipment or piping within the medium pressure increases, more than a specified value automatically when open, through a discharge medium system to prevent the pipeline or equipment within the medium pressure in excess of the prescribed value. Relief valve belong to automatic valve class, the relief valve is mainly used in boilers, pressure vessels and piping, control pressure shall not exceed the specified value, to protect personal safety and equipment operation plays an important role. The relief valve, the form of the structure is divided into vertical hammer, lever, spring type and leading type ( Impulse type) ; According to the body structure, can be divided into two kinds of, closed and not closed. Enclosed the relief valve is not leaked out medium, all along the discharge to the designated location, commonly used in toxic and corrosive medium. For with air and steam safety valve, use no more closed valve. For the selection of Industrial Valves products, should according to the actual seal pressure to determine. For spring safety valve, in a nominal pressure ( PN） Has several work stress level within the range of the spring, when placing order, in addition to indicate the relief valve model, name, medium and temperature, it should indicate the body sealing pressure, or else the maximum sealing pressure supply.

the relief valve installation and maintenance should be paid attention to the following:

all kinds of safety valve should be installed vertically.

the relief valve outlet should be without resistance, avoid to produce compression phenomenon.

the relief valve before installation should be special test, and check its official seal.

the relief valve should be of use in regular inspection.

The single most important quality you'll need as Shenzhen Mech Valve Trading Co., Ltd. is 'stick-to-it-iveness' or grit, a combination of perseverance, patience and adaptability.
Shenzhen Mech Valve Trading Co., Ltd. is a reliable company that offers wonderful . In addition, the company also provides related components to make it more efficient. To know more, go to Mech Valve.
Shenzhen Mech Valve Trading Co., Ltd. are providing this to you at very low cost. Our claims are only based on different feed-backs received from various clients and not based on self-judgment.
You will have a y gate valve that looks cast iron gate valve all the time, Because your is handling with it.