Pneumatic tee internal thread ball Industrial Valves installation steps: ( 1) Take the pneumatic tee internal thread ball valve flange on both sides of the protection cover, under the valve fully open state to wash clean. ( 2) Before installation should be in accordance with the provisions of signal, Electric or pneumatic) The engine test ( Prevent because of transportation vibration impact performance) , qualified rear can install ( According to the electric actuator wiring diagram wiring) 。 ( 3) Connected to the pipe before, you must wash and clean the pipe residual impurities ( These substances may damage the seat and the ball) 。 ( 4) Internal thread ball valve in the pneumatic tee during installation, please don't use valve actuator part as a lifting of the lifting point, in order to avoid damage the actuator and accessories. ( 5) Pneumatic three-way internal thread ball valve should be installed in horizontal or vertical direction of the pipeline. ( 6) Installed near the point of pipeline with low or bear the phenomenon of external force, can use a pipe support or support to eliminate the deviation of pipelines. ( 7) Pneumatic tee after internal thread ball valve and pipe connection, please use specified torque cross locking bolt flange connection.
Shenzhen Mech Valve Trading Co., Ltd. supports their market leadership with savvy marketing skills to create an prime brand.
go to Mech Valve to get an amazing offer at favorbale price. the resilient seated gate valve y gate valve actually works and is worth a try.
This is especially true when Shenzhen Mech Valve Trading Co., Ltd. have got a global business that's building bridges between manufacturers and customers across the globe.